Fongo Community Forums

Strange ... now I can place outgoing calls, I see my unit online (registered) but when I call my number it says the number is not in service. I tried removing the follow me settings ... same issue, put it back ... still cannot call my number ... The outgoing calls are ok ... UPDATE: I was too trigge...

After the Feb 12 network upgrades, I had issues with the outgoing part (was not able to hear when the phone was ringing and when the other party answered). I did forward my ports the day before yesterday and it worked ok until yesterday evening when the phone stopped registering. Now I am out of ser...

Also see: http://forum.fongo.com/viewtopic.php?f= ... 226#p44226

You are 100% right. Just be sure (as per an email from freephoneline support) to open the 5060-6061 (UDP) and the 10000-20000 (UDP)... check the portforward links Funkytown posted above!

Issue solved: I had to reprogram the router and re-open/re-map the ports 5060-6061 (UDP) and 10000 -20000 (UDP) and to re-enable the UPnP.

Also see: http://forum.fongo.com/viewtopic.php?f= ... 226#p44226

It happened to me yesterday as well! Same issue. When placing outgoing calls I hear nothing just dead air. The other party can hear the rings and they answer anh hear me but I cannot hear them. Incoming calls are ok. I have a Talkswitch PBX. The router is Tenda N60 What I did to solve the problem: I...

It happened to me yesterday as well! When placing outside calls I just hear nothing ... dead air. But the other party hear the ring and they answer. They can hear me but I cannot hear them. I have a Talkswitch PBX. The router is Tenda N60 What I did to solve the problem: I had to reprogram the route...

It happened to me yesterday as well! EXACTLY the same issue. I have a Talkswitch PBX. The router is Tenda N60 What I did to solve the problem: I had to reprogram the router and re-open/re-map the ports 5060-6061 (UDP) and 10000 -20000 (UDP) and to re-enable the UPnP. ALL WORINGK AGAIN NOW. I posted ...

It happened to me yesterday as well! I have a Talkswitch PBX. The router is Tenda N60 What I did to solve the problem: I had to reprogram the router and re-open/re-map the ports 5060-6061 (UDP) and 10000 -20000 (UDP) and to re-enable the UPnP. ALL WORINGK AGAIN NOW. Also see http://forum.fongo.com/v...

Same here: currently there is no sound for outgoing calls, but incoming calls is ok. Any idea when this will be resolved?+ I used the service with no issues for quite a while now (few good months) ... EDIT: I cannot hear the other party even ringing ... the other party can hear me ... And I can rece...

I will do that (install the softphone) and try placing calls from it and then from the Talkswitch to see if it is a hardware issue, thanks. I tried calling from the freephoneline few numbers: local, long distance or toll free number for customer service at freephoneline (so they can see it on their ...

I will try this evening what you say ... My PBX works without any other issues with 2 other voip providers ...I played a bit with few SIP settings (there are not too many as it is simple) with no avail... (I tried with both NAT keep alive and not e.g.) What is seems to me is that once the phone is i...

Hi guys, I bought a unlock key for a Voip number from freephoneline and I got all the details last month. I did few basic tests and it worked. I cancelled other voip service provider today and I try to use the the freephoneline number. I use a Talkswitch PBX which work without any issues with anothe...

Hi guys, I just bought the SIP settings and activated a freephoneline number in Montreal and I was assigned a 438 area code number (which supposed to be SIMILAR, EXACT area code as 514 area code). Now, when trying to call to my 438-388-xxxx number from a 514 Montreal number it says that this is a lo...

Hi guys,

I just bought the SIP config file and I install it on my Samsung Android 2.3 (3CX application) and on my Blackberry Playbook 2.0.

With both systems I do can call and receive calls BUT I cannot hear...the other party do hear me well

Any ideas? I tried quite a few changes ...

Thanks,

Hi,

I tried to configure my account in 3CX application with Android 2.3.

I can call or receive calls, the other party hears me BUT I cannot hear

(same issue on another device, different OS)

Thanks,

Hi guys,

I just bought the SIP config file and I install it on my Samsung Android 2.3 and on my Blackberry Playbook 2.0.

With both systems I do can call and receive calls BUT I cannot hear...the other party do hear me well

Any ideas? I tried quite a few changes ...

Thanks,