Fongo Community Forums

try changing your sip server from sip.fongo.com to voip.freephoneline.ca or voip2.freephoneline.ca.
I used voip2 as i have had issues with voip in the past.

I'll ask the obvious questions and hope that FPL forum mod's can answer the best they can; 1)if switching to voip.freephoneline.ca or voip2.freephoneline.ca gets your ATA registered (via freephoneline.ca account), does this mean that they are interchangeable with sip.fongo.com? 2)Any advantages betw...

rino wrote:Hi,

Does anyone know the configuration for the model: HT701 ?

Here you go, hope this is what you were after.
http://forum.fongo.com/viewtopic.php?f=15&t=5366

Hi, We have a freephoneline number with the SIP config. It seems at least once or twice a day, we get a call from what displays as an IP address or sometimes just the number 100 or 101. We answer and there is no one on the other end. When we hang up the number calls again. This repeats about 4 or 5...

The reason I am asking is because HT701 is curently being used on Fongo Home phone users. Does the statement mean that FPL does not support HT-701 as an acceptable ATA hardware? or were you simply trying to understand what combination service + hardware i'm using? If Fongo and FPL have different se...

HT 701 w/FPL service. Let me know what additional info i can provide.

Yes Fongo Support, I am using FPL.

Configuration settings for the Grandstream HandyTone HT-701 FONGO_steve or anyone that is familiar with these two settings. "Failed Registration Re-Try Interval: 120 seconds" - As per the official (i'm assuming it to be as) Required Settings vs the 20sec recommended in this thread, which ...

Everytime I use voip.freephoneline.ca as my sip server, the line goes down and cannot register. I change to voip2.freephoneline.ca and the line registers. I switch back to voip.freephoneline.ca and the line goes down again. Switch back to voip2.freephoneline.ca and line is working. There must be so...

Hi, Having issues with late night calls from caller id "101" and from what i've read this far and undersatnd, these are because of script kiddies doing ports scans. I've also learned from reading is that port 5060 is the default SIP port for most VOIP providers use (this port is the port t...