Fongo Community Forums

Hi again, It's finally solved :-) It is indeed about the callerid. Here is my config before: exten => _1NXXNXXXXXX,1,Dial(SIP/${EXTEN}@Home) exten => _1NXXNXXXXXX,n,Hangup() ... and after ... exten => _1NXXNXXXXXX,1,Set(CONNECTEDLINE(name,i)=CID:51412312324) exten => _1NXXNXXXXXX,2,Set(CALLERID(all)...

Thanks a lot, Liptonbrisk! FreePbx is a simple UI for Asterisk. It will end up generating configuration files that are perfectly compatible with my Asterisk. I only need to know what exactly has been changed in FreePBX... And, as I mentioned, everything works just fine from Zoiper (voip client). I w...

Hi, I have the same problem in asterisk (no gui). I changed the caller id from callerid = "John Smith" <5141231234> to callerid = 15141231234 where 15141231234 is my registered num with FPL, but still getting 484 code. Any suggestion? Many thanks! Note: Everything (ie both incoming/outgoin...

Thanks for your reply, Liptonbrisk!
I am using the same configuration that I had for ten years. No cid spoofing. My number was always 1514NXXXXXX..
Are you saying that format of outgoing numbers should be like 1NXXNXXXXXX? I did not use to put 1 before the 10-digit number..

Many thanks!

Hi,
Anyone is getting this problem? I am not able to make outgoing call.
I keep on getting: 484 "Address Incomplete"
Does anyone know why this happened all of the sudden?
Many thanks!

Hi,
I noticed that none of my numbers work today after 1:00PM. Both are 514, Roxboro and Montreal, Voip unlocked.
Do you have a service status page? Sorry, I was not able to find that yet... and many of the http pages return 408 error.

Many thanks,
aegyssus

That's correct. I have bought two unlock keys and I have these numbers for about three years. They used to work fine but now it takes either very long or times out to connect the call.
EyeBeam is a Windows SIP client application.
Thanks!

I see this problem is consistent now and it occurs much more often lately: - I use eyeBeam client - I call my Rogers cell number (I do not think the problem is specific to a particular service provider) - My cell does not ring immediately - eyeBeam shows a timeout message after a while and drops the...

hete wrote:What is Eyebeam ?

It's a software SIP client. It seems to always work as long as I use reasonable settings, no matter how I change the registration settings.

It's definitely not related to the reg timeout. When I use EyeBeam, the service works, no matter what value I put there...

I got your point and it makes sense. I do want to answer that call too, but on my side.. not theirs.
Thanks!

Thanks tbrummell!
Though it's quite weird that a paid account cannot deactivate an unnecessary/annoying "feature"...

I need to control the voice mail from my answering machine attached to the linksys ata. Currently the voice mail will automatically trigger if ringing more than five times,
Is there a way to completely get rid of the voice mail?
Thank you.

Do you have any news for this issue?
Thanks!

I just sent you the details in PM.
Thanks!

I try to call (416) 353-XXXX and it says it's long distance and "thank for using AllStream services"...
Is it temporary or it's here to stay...
Thanks!

We allow third-party user agents and do not block any user agents either. That's very good to know. I think FPL provides exactly what's needed for personal use whether we use ATA, softphone or a free pbx. With all due respect, for business purposes one might need a bit more... But that's why Worldl...

He just said that they dont want ppl to use asterisk since it is alot of companys that use it. I wish they told me before i signed up for a number. I agree 100%. On one way they're promoting their business, on other way they are shooting customers from behind and also they treat registered users as...

it's still not working... my initial trixbox config (which worked for a year) was: username=1514xxxyyyy type=friend secret=xxxxxx qualify=no insecure=very host=voip.freephoneline.ca fromdomain=voip.freephoneline.ca disallow=all canreinvite=yes allow=ulaw&alaw&gsm however, the things work fin...

Please, anyone can post a valid configuration for Asterisk?
My config worked fine for a while but it's not working anymore since yesterday... I keep getting this account number is not valid.
BTW, more and more devices support asterisk, so it's very important to clarify this.
Thanks!

sorry for not checking the forum for so long... probably you've fixed it by now but just for the sake of the conversation... I did not put anything specific there; in my case I put "FPL" but I do not think the trunk name is important. However, it's important to put your phone number in the...

Thanks for your message. It's exactly the topic: that's what I meant by "registred users" in the topic's name: those who payed for the configuration. I've already called the tech support; they keep saying that 13000-13001 port forwarding is the issue. I even sniffed the UDP (RTP and SIP) p...

Thanks for your message Krazie243! I opened up those ports and still nothing. However, everything is smooth with your FPL client... and for the other SIP providers I do not need to open any special port. SIP Communicator works too, it's just that XLite refuses to work with FPL... Thanks for any sugg...

Hi, :!: Can anyone please provide the configuration details for using XLite client with a registered account? :oops: I put the DID as username and also as auth username along w/ the passwd but I cannot hear anything. However, I can take the voicemail (*98) with no problem, i.e. I can hear what the o...