Fongo Community Forums

The mystery has been solved! Thanks for your advice. I ended up changing Proxy Server to voip.freephoneline.ca, but in IP form. Don't know what changed with the previous server.

What part (TAB) of the ATA should these Required Settings be in?

SIP Server:
voip.freephoneline.ca
Alternative SIP Server:
voip2.freephoneline.ca
Transport:
UDP
Port:
5060

Well, tried the above instructions, followed the guide and made the SIP port and Handle changes, reset Bell HUB 2000 and ATA in that order, but to no avail.
As for the voip.freephoneline.ca and voip4.freephoneline.ca:6060 , I just loose the dial tone.
Thanks for the suggestions.

Thanks will look into it.

Please Help! After my system has been working fine for years and now with a Fax machine, was working fine also ,but after a month or so with a fax machine my Linksys PAP2 keeps dropping outgoing calls after 33 secs of talk. Incoming calls seem fine. My router is the Bell Home Hub 2000, Bell Fibe. It...

Please Help! After my system has been working fine for years and now with a Fax machine, was working fine also ,but after a month or so with a fax machine my Linksys PAP2 keeps dropping outgoing calls after 30 secs of talk. Incoming calls seem fine.
What can be causing this?

Linksys PAP2 No dial tone, Line 1 indicator light is off Registration state showing = Can't connect to login server Internet access is fine! What happened? Is the incoming/outgoing server down? **********Issue has been solved: re-entered Proxy and Outgoing Proxy IP and it reconnected.************

When speaking to someone the voices sometimes become digitalized. It's like I'm speaking to some in the Matrix movie! Anyone know why this happens and is there a fix? Details: I'm using 4 basic analog phones throughout my house, connecting through a Linksys PAP2T ATA, LINKSYS WRT320N Router and then...

I had the same issue, incoming calls going straight to voice mail.
As posted I am running G729a and I had "Use Pref Codec Only" set to "Yes". I changed it to "No" and the calls started ringing through! So the line is working again!

Kris, I do have it set to Yes, but it seems to display the #.

How can I set my ATA to display Private Number when calling people. I want my # hidden.
I want it to be a static configuration not a *67 before every call I make. Also to work on cell phone Networks two.

Thanks
Ed

Thanks for your feedback, I did manage to get it working. I happened to loop the second block of room lines back to the original Bell block when the second block should only be directly connected to the ATA . My OOP's! Still had the Bell service concept in mind.

Thanks again!

Has anyone successfully wired their house to their ata? I have 3 house phone cables from 3 different rooms connecting to a phone block and from that block I have a phone patch cable plugged into port line1 of my Linksys PAP2T ATA. Unfornately, even though a receive a dial tone, I also have static an...