Can make calls BUT *cannot* receive calls

This section is for general discussions surrounding digital phone service.
Post Reply
jannable
Just Passing Thru
Posts: 2
Joined: 04/11/2010
Computer OS: Windows 7

Can make calls BUT *cannot* receive calls

Post by jannable »

I recently changed my 'follow-me' settings and now I'm not able to phone my soft-phone. I'm able to phone out but cannot receive any calls. When I call to my FPL phone, I hear nothing for about 10 seconds and then it gives me the busy signal. I've tried disabling all the background tasks on my computer in case it was slowing the soft-phone down too much - no luck. Any recommendations? I've removed the follow-me settings but even though it's disabled, I'm still required by the interface to enter a value between 2 and 10.
User avatar
FONGO_kris
Site Moderator
Posts: 1937
Joined: 05/06/2009
SIP Device Name: Polycom 550 IP Phone
Firmware Version: 4.2.0.0310
ISP Name: Rogers Cable
Computer OS: Ubuntu 11.10
Router: Cisco E1200-N
Smartphone Model: Samsung Galaxy S2
Android Version: 4.0.3
Location: Cambridge, Ontario, Canada
Contact:

Re: Can make calls BUT *cannot* receive calls

Post by FONGO_kris »

I believe it is 2 and 30, but could you send me your phone number and I will look into it?
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
jannable
Just Passing Thru
Posts: 2
Joined: 04/11/2010
Computer OS: Windows 7

Re: Can make calls BUT *cannot* receive calls

Post by jannable »

Still no luck. Should I cancel, uninstall, and request a new phone line? Next time, I just won't mess with the follow-me settings.
Post Reply