OBi200 - How to setup (Configure) Caller Name
- I have a OBi200 on Freephone line but when I place calls the recipient see's the incoming call as 'Unknown Name' and my phone number. Does anyone know how to configure the Caller Name for Freephone line service?
Thanks.
OBi200 - How to setup (configure) Caller Name
-
- Just Passing Thru
- Posts: 4
- Joined: 01/27/2014
- ISP Name: Rogers Cable
- Computer OS: XP
- Router: WRT160N - Linksys
- bridonca
- Technical Support
- Posts: 1225
- Joined: 11/16/2009
- SIP Device Name: Netgear WGR615V
- Firmware Version: latest
- ISP Name: Eastlink
- Computer OS: XP
Re: OBi200 - How to setup (configure) Caller Name
I do not think there is anything you can do on your end. The telco on the other end can chose to look at the information to see who is calling on a VOIP call, but they choose not to for whatever reason.
-
- Just Passing Thru
- Posts: 13
- Joined: 01/24/2011
- SIP Device Name: GrandStream Ht-286
- ISP Name: TekSavvy-Cable
- Computer OS: Win 7
- Router: Asus WL500W
Re: OBi200 - How to setup (configure) Caller Name
I have exactly the same issue. I have been using FPL for almost 4 years now as my home phone line. I have PAP2-NA ATA running the latest firmware 5.1.6. It worked perfectly until 6 months ago, when all outbound calls made using fpl, recipient started seeing caller ID "Unknown".
I have no idea how to solve the issue, as it is on the FPL side.
I have no idea how to solve the issue, as it is on the FPL side.
- Fongo Support
- Site Moderator
- Posts: 1689
- Joined: 01/01/2013
Re: OBi200 - How to setup (configure) Caller Name
Hi there,fch wrote:I have exactly the same issue. I have been using FPL for almost 4 years now as my home phone line. I have PAP2-NA ATA running the latest firmware 5.1.6. It worked perfectly until 6 months ago, when all outbound calls made using fpl, recipient started seeing caller ID "Unknown".
I have no idea how to solve the issue, as it is on the FPL side.
Have you tried this:
Dial *68 and hang up.
*68 Block CID Deact Code (Removes caller ID blocking on all outbound calls.)
Reference from below:
http://www.voipmechanic.com/linksys-sip ... -codes.htm
Let me know.
Thanks,
-
- Just Passing Thru
- Posts: 13
- Joined: 01/24/2011
- SIP Device Name: GrandStream Ht-286
- ISP Name: TekSavvy-Cable
- Computer OS: Win 7
- Router: Asus WL500W
Re: OBi200 - How to setup (configure) Caller Name
Thanks Fongo Support. *68 solved the issue.