Page 1 of 1
Outgoing calls
Posted: 11/02/2009
by xtreme_end
It seems there is a problem with outgoing calls. Many times it's happening that when I make outgoing calls, I can hear the person on the other side of the line but I can't be heard on the other side. This is happening from 3 days now. Is there a problem or something I need to do on my end. Please advice. I'm using a Linksys SPA2102 ATA.
Thanks for your help.
Re: Outgoing calls
Posted: 11/02/2009
by FONGO_steve
Have you forwarded any ports from your router to the ATA? If not, you'll want to do this as it can be the number one culprit of one-way audio.
Re: Outgoing calls
Posted: 11/02/2009
by xtreme_end
My ATA is connected to modem directly and router is connected to ATA.
Re: Outgoing calls
Posted: 11/11/2009
by sebassss
I have the same problem. I posted this problem without any answer. Could you guys send a detail way to open UDP ports? That would help a lot of users for sure. Also, you guys should put a users manual to set the ATA up. I know that it's a free service but more people would be interested in your product.
Re: Outgoing calls
Posted: 11/11/2009
by FONGO_kris
Do you mean set up physically or configure it...
Re: Outgoing calls
Posted: 11/11/2009
by FONGO_kris
Here's a quick one...