no tone (belkin54g PAP2T-NA,Rogers 7M) for FPL

[dasongxiao]

I used Rogers cable 7M express, belkin router, linksys PAP2T-NA, after configuration, but line 1 LED is lit, but no tone. In my comfigfuration web-based screen, no where to fill in those data like: RTP Packet Size: 0.020 Ring Tone Frequency: 52 Ring Tone Voltage: 90 no where to fill in Tone Spec” category:Ring Waveform: Sinusoid;“Dial Plan” category:Dial Plan:(911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|98*|[6-7]x*xxxxxxxxxxx.), please tell me where went wrong?How to fix?

[ogammo]

go to advanced user after you login to pap2t

[dasongxiao]

only advanced view, no where to choose "advanced user".

[Jake]

Make sure you click 'Admin Login' as well as clicking 'Basic View (switch to advanced view)'

The admin login is towards the top right under where it says PAP2. The adcanced view link is in the center just to the left of the Admin Link.

[FONGO_kris]

Admin Login > Basic Veiw (Switch to Advanced Veiw)

As Jake said before.

[dasongxiao]

Everything is ok now. Because PAP2T-NA has two ports, the dial tone will come up after making switch with the other port. Thanks for help.

[FONGO_kris]

No problem, glad it's working.