FPL with HT-701 (Firmware 1.0.8.2)

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

Re: FPL with HT-701 (Firmware 1.0.8.2)

Postby Liptonbrisk » 09/27/2018

mh1983 wrote:So far so good. SIP OPTIONS Keep Alive Interval seems to have changed to a default of 30, whereas my guide calls out 20. That's the only difference I've noticed so far. Will monitor a little more before updating the guide.


It should be 20.

https://support.freephoneline.ca/hc/en- ... redentials
"Keep Alive Interval: 20 seconds"

Your guide is correct.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 754
Joined: 04/26/2010
SIP Device Name: OBi202
Firmware Version: 3.2.2 (Build:5921EX)
ISP Name: Cable
Computer OS: Windows 10 x64 Pro
Router: Asuswrt-Merlin

Share On:

Re: FPL with HT-701 (Firmware 1.0.8.2)

Postby Melchizedek » 10/06/2018

Hi, thank you very much for your guide, I have recently acquired an HT702, updated its firmware, reset it to default and followed this guide successfully.

I have two questions:

1) Can you tell me how I could specify, in the Dial Plan, that dialing 411 should get me to 111-111-1111, and that dialing 811 should get me to 222-222-2222?
2) I will need to configure a second HT-701/HT-702 device, but this time with voip.ms. It looks like the voip.ms configuration guide is a little dated (based on firmware 1.0.0.18). Should I still follow the outdated voip.ms guide, or follow this FPL guide instead and replace the credentials?

Thanks!
Melchizedek
Just Passing Thru
 
Posts: 24
Joined: 06/10/2012
SIP Device Name: OBi100
Firmware Version: Always Latest
ISP Name: Virgin Mobile (Fiber)
Computer OS: Windows 10
Router: Virgin router (Valerie)

Re: FPL with HT-701 (Firmware 1.0.8.2)

Postby Liptonbrisk » 10/06/2018

Melchizedek wrote:
1) Can you tell me how I could specify, in the Dial Plan, that dialing 411 should get me to 111-111-1111, and that dialing 811 should get me to 222-222-2222?


You're in Quebec, so you don't need to do that: https://support.fongo.com/hc/en-us/arti ... 1-811-911-.
All you need in your dial plan is [2-9]11

But <811=2222222222> does what you're asking.

I will need to configure a second HT-701/HT-702 device, but this time with voip.ms.


We don't support other VoIP services here. Please contact voip.ms.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 754
Joined: 04/26/2010
SIP Device Name: OBi202
Firmware Version: 3.2.2 (Build:5921EX)
ISP Name: Cable
Computer OS: Windows 10 x64 Pro
Router: Asuswrt-Merlin

Previous

Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 1 guest