Obihai100 and Untangle 10

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

Obihai100 and Untangle 10

Postby nu_bee » 10/13/2013

Obihai100 and Untangle 10


My settings with my Obihai100 (a lot more stable and fast than the grandstream)...

Do your firmware updates

sip user = username
sip pw = password

//-------------------------
System Management
Auto Provisioning
Method : disable

//-------------------------
Service Providers
ITSP Profile A
General
DTMFMethod : rfc2833
STUNEnable : yes
STUNServer : 193.189.124.165
X_ICEEnable : yes
X_SymmetricRTPEnable : yes

SIP
ProxyServer : 208.65.240.165
RegistrarServer : 208.65.240.165
UserAgentDomain : 208.65.240.165
OutboundProxy : 208.65.240.165
RegistrationPeriod : 3000
TimerT1 : 1000
X_UseRport : no
X_FaxPassThroughSignal : auto

RTP
LocalPortMin : 15555
LocalPortMax : 15555

RTCP
Enable : yes

//-------------------------
Voice Services
SP1 Service
X_KeepAliveEnable : yes
X_KeepAliveExpires : 20
X_KeepAliveServer : 208.65.240.165
X_KeepAliveMsgType : stun
X_UserAgentPort : 5555

AuthUserName : sip user
AuthPassword : sip pw
URI : sip user@voip.freephoneline.ca

CallerIDName : display vu...
MessageWaiting : no
X_SkipCallScreening : no
X_SRTP : ...when possible

SP2 Service
Enable : no

OBiTALK Service
Enable : no

//-------------------------
Physical Interfaces
PHONE Port
PrimaryLine : sp1 service

//-------------------------
Codecs
Codec Profile A
G729 Codec
Priority : 7

G726R16 Codec
Enable : yes
Priority : 6

G726R24 Codec
Enable : yes
Priority : 5

G726R40 Codec
Enable : yes
Priority : 3

FAX Event
Enable

//-------------------------

My settings in Untangle 10...

bypass rules
5060
3478
5555
15555


port forward
5555
to device ip

15555
to device ip

I don't user the qos anymore. For the torrenting, I'm just putting a in my Synology download limit rate...

I use the modules : reports, web filter, antivirus and sometimes the add filter (when i have the energy to play with it)


Have fun :)
nu_bee
Just Passing Thru
 
Posts: 13
Joined: 05/08/2012
SIP Device Name: Obihai100
ISP Name: Teksavvy
Computer OS: Debian, Linux
Router: IpFire

Re: Obi100 Obihai100 and working fax :)

Postby nu_bee » 10/11/2014

Here is my new config of my Obi100 to make my fax work :) (with ipfire, untangle, ...)

1st : Use sip.fongo.com

Note: I'm using port 6655 and 15555 in my firewall (forwarded ports). I using an internal stun and ntp.


System Management
Network Settings
AddressingType : static
IPAddress : ...
SubnetMask : 255.255.255.0
DefaultGateway : ...
DNSServer1 : ...
NTPServer1 : ...
LocalTimeZone : gmt -5

Auto Provisioning
Method : disable

Device Admin
AdminPassword : ...
UserPassword : ......

//-------------------------
Service Providers
ITSP Profile A
General
DTMFMethod : rfc2833
STUNEnable : yes
STUNServer : ...
X_ICEEnable : yes

SIP
ProxyServer : sip.fongo.com
RegistrarServer : sip.fongo.com
OutboundProxy : sip.fongo.com
RegistrationPeriod : 3600
RegisterRetryInterval : 120
DSCPMark : 20
X_UseRport : no
X_FaxPassThroughSignal : rfc2833

RTP
LocalPortMin : 15555
LocalPortMax : 15555
DSCPMark : 20

RTCP
enable : yes

//-------------------------
Voice Services
SP1 Service
X_KeepAliveEnable : yes
X_KeepAliveExpires : 20
X_KeepAliveServer : sip.fongo.com
X_KeepAliveMsgType : stun
X_UserAgentPort : 6655

AuthUserName : sip user
AuthPassword : sip pw
URI : sip user@sip.fongo.com

CallerIDName : display vu...
MaxSessions : 5
CallForwardOnNoAnswerRingCount : 4
X_VMWIEnable : yes
MessageWaiting : no
X_SkipCallScreening : no
X_SRTP : use X_SRTP when possible

SP2 Service
Enable : no

OBiTALK Service
Enable : no

//-------------------------
Physical Interfaces
phone port
primaryLine : sp1 service

riginer
RingFrequency : 25

port settings
SilenceDetectSensitivity : low

timers
ReorderDelayTime : 1500

//-------------------------
Codecs
Codec Profile A
G729 Codec
Priority : 7

G726R16 Codec
Enable : yes
Priority : 6

G726R24 Codec
Enable : yes
Priority : 5

G726R40 Codec
Enable : yes
Priority : 3

FAX Event
Enable

//-------------------------

:)
nu_bee
Just Passing Thru
 
Posts: 13
Joined: 05/08/2012
SIP Device Name: Obihai100
ISP Name: Teksavvy
Computer OS: Debian, Linux
Router: IpFire

Re: Obihai100 and Untangle 10

Postby bridonca » 10/11/2014

Not that it is going to affect you the way you have it set up, but unless something has changed with Fongo that I was not informed, the G.726 codec is not supported. Only G.729 and G.711. But since you have G.729 as your first priority codec, you probably will not have any problems.
User avatar
bridonca
Technical Support
 
Posts: 1133
Joined: 11/16/2009
SIP Device Name: Netgear WGR615V
Firmware Version: latest
ISP Name: Eastlink
Computer OS: XP

Re: Obihai100 and Untangle 10

Postby nu_bee » 01/23/2015

Noted... Thank's :)
nu_bee
Just Passing Thru
 
Posts: 13
Joined: 05/08/2012
SIP Device Name: Obihai100
ISP Name: Teksavvy
Computer OS: Debian, Linux
Router: IpFire


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 1 guest