marginal wrote:Thank you very much sebastian.barbieri.
I think it worked for me too, the only thing is I don't really understand how it works, what exactly it does to my ATA ...
Thanks.
pitcritter wrote:Thanks. This worked perfectly first time. Couldn't have been easier. There is one slightly strange thing though. My phone doesn't ring normally. It does ring, but it makes a strange chirping sound instead of what I'm used to.
As per instructions elsewhere, I've set up as follows:
Under “Ring and Call Waiting Tone Spec” category:
Ring Waveform: Sinusoid
Ring Frequency: 52
Ring Voltage: 90
The phone is a Uniden DECT 6 cordless, that's always worked perfectly with Vonage. It's really strange because the handset should generate it's own ring, or so I thought.
I did buy my PAP2 from eBay. It came from Asia, so it might have been provisioned for another country.
Ideas?
diabolo wrote:Sabastien what if u have spa2102 and videotron or sympatico as internet provider .I'm just curious.Great job though.
xoy74 wrote:If you really want to make this <b>real easy</b> replace everything starting with "Once you have your ip address for that ATA." ... and ending with "Wait about 10-30 secconds." with:
Once you have your ip address for that ATA, open a browser and type
http://ip_address/admin/resync?http://w ... ap2FPL.xml
bigg3522 wrote:IS your time settings reporting properly? Mine aren't...
Return to Device Configuration Sharing
Users browsing this forum: No registered users and 28 guests