GXP 2100 FPL configuration- Part one- Basics

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Forum rules
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

GXP 2100 FPL configuration- Part one- Basics

Postby Fongo Support » 12/08/2013

Good morning,

Please see attached FPL config for GXP2100

http://www.grandstream.com/products/ip- ... es/gxp2100

Setup Grandstream GXP2100 for FPL.docx
(556.23 KiB) Downloaded 394 times
User avatar
Fongo Support
Site Moderator
Posts: 1675
Joined: 01/01/2013

Share On:

Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 1 guest