Dialing a teleconference bridge with SPA112

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

Dialing a teleconference bridge with SPA112

Postby pandaa » 05/26/2014

Hi,

I have set up FPL with Cisco SPA 112 . It works fine when I call my cell phone but when I dial my company's conference bridge, it dials the number but then sits there kind of muted.
I followed the configuration from here : http://blog.voipdiy.com/2013/07/configu ... -with.html

Is there anything else I need to configure to make it work for calling conference bridges.

Thanks
pandaa
One Hit Wonder
 
Posts: 1
Joined: 05/26/2014
SIP Device Name: SPA112
Firmware Version: 1.3
ISP Name: Rogers
Router: Roger's

Re: Dialing a teleconference bridge with SPA112

Postby Jake » 05/26/2014

Look on the Line 1 Tab (you may need to log in as admin and advanced) for the DTMF settings. Some systems will work on one setting while others wont. Try the different settings there, but I usually find Inband works with most systems.
User avatar
Jake
Technical Support
 
Posts: 2823
Joined: 10/18/2009


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 30 guests