OBi100 with ROGERS Setup Guide

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

OBi100 with ROGERS Setup Guide

Postby Jake » 07/15/2014

Credits to Val, thank you for your help.

The attached PDF will help you set up your OBi100 device with ROGERS from scratch. It is a known working configuration so if you are having troubles with your OBi100 with ROGERS reset back to defaults and follow this guide.

Edit by LiptonBrisk: Navigate to Service Providers-->ITSP Profile (FPL)-->SIP
RegisterRetryInterval should be 120 seconds.
https://support.freephoneline.ca/hc/en- ... /212430746
And then do what Mango wrote below.
Attachments
OBi 100 Freephoneline Guide ROGERS.pdf
(1023.81 KiB) Downloaded 2365 times
User avatar
Jake
Technical Support
 
Posts: 2823
Joined: 10/18/2009

Prevent calls arriving with caller ID such as 100 or 1001

Postby Mango » 01/16/2015

To prevent calls arriving with caller ID such as 100 or 1001, if the calls do not appear in your call logs on the Freephoneline website, use the following procedure:

1) If you use your router to forward ports to your OBi ATA, remove your port forwarding unless things won't work any other way. If your router has an option like "strict UDP session control", enable it, and/or configure its firewall to be as secure as possible. You are receiving these calls because your router's firewall is insecure.

2) Navigate to Voice Services >> SPx Service. Set X_UserAgentPort to a random number between 20000 and 65535. This will make it more difficult for the scanners to find you. If you must forward ports, you will need to update your port forward.

3) Also from within Voice Services >> SPx Service, set X_InboundCallRoute to {>1xxxxxxxxxx:ph}
If the scanners do find you, this will cause your OBi to reject the call. (Note: replace 1xxxxxxxxxx with your FPL number.)
Mango
Tried and True
 
Posts: 411
Joined: 08/14/2014
SIP Device Name: OBi110
Firmware Version: 1.3.0 (Build: 2824)
ISP Name: Telus
Computer OS: Windows 7
Router: Toastman Tomato


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 5 guests

cron