Linksys PAP2T Setup Guide

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

Linksys PAP2T Setup Guide

Postby Jake » 08/06/2014

Credits to Val, thank you for your help.

The attached PDF will help you set up your Linksys PAP2T device from scratch. It is a known working configuration so if you are having troubles with your Linksys PAP2T reset back to defaults and follow this guide.

Edit by LiptonBrisk:
1) Navigate to Voice-->SIP tab-->SIP Timer Values (sec)
a. Reg Retry Intvl should be 120 seconds
https://support.freephoneline.ca/hc/en- ... redentials

b.Mango suggests the SIP T1 default setting is too aggressive, and to help resolve potential registration issues, T1 should be set to 1.
Navigate to Voice-->SIP tab-->SIP Timer Values-->SIP T1
Change SIP T1 to 1


2) In your PAP2T, Navigate to the SIP tab-->NAT Support Parameters, and make sure that the following settings are enabled:
(Thanks to Mango)
a)Handle VIA received-->yes
b)Handle VIA rport-->yes
c)Substitute VIA Addr-->yes

3) In your PAP2, Navigate to Line 1 (or whatever you're using for FPL)-->SIP settings, and change SIP Port to a random number between 30000 and 60000. Do this for security reasons (to help avoid SIP Scanners/hackers). Also, this step may help to temporarily address a corrupted NAT association that's developed between a router and ATA (if you're having registration issues, try selecting a new random port number in this range, and then reboot the ATA. If that works, you were dealing with a corrupted/stale NAT association in your router).

Never use UDP 5060 for local SIP Port, and don't use the same UDP port number for the SIP port on any other Line.

4. In your ATA, navigate to Voice-->Line (whichever you use for FPL)-->Supplementary Service Subscription-->Block CID Serv:
a) change to no
b) Click "submit"
Do this to avoid 15 minute call disconnections.

5.Navigate to Line (being used for FPL) tab-->Dial Plan
a) Use ([2345689]11|988|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxx.|*98)
Attachments
Linksys PAP2T ATA Config FreePhoneLine.pdf
(378.86 KiB) Downloaded 4688 times
User avatar
Jake
Technical Support
 
Posts: 2823
Joined: 10/18/2009

Re: Linksys PAP2T Setup Guide

Postby Mango » 01/16/2015

To prevent one-way or no audio with the new FPL switches, set the following on the SIP tab:

Handle VIA received: yes
Handle VIA rport: yes
Substitute VIA Addr: yes
Mango
Tried and True
 
Posts: 411
Joined: 08/14/2014
SIP Device Name: OBi110
Firmware Version: 1.3.0 (Build: 2824)
ISP Name: Telus
Computer OS: Windows 7
Router: Toastman Tomato

Re: Linksys PAP2T Setup Guide

Postby Badenoch » 08/30/2017

What do u do if u get ur IP but cant access it on laptop. Says page not available... i cant access the ATA because the IP wont work.. So frustrated!
Badenoch
Just Passing Thru
 
Posts: 2
Joined: 08/30/2017
SIP Device Name: free phoneline with ATA
ISP Name: Cable
Computer OS: Windows 7
Router: Cisco DPC3848V

Re: Linksys PAP2T Setup Guide

Postby Liptonbrisk » 09/03/2017

Badenoch wrote:What do u do if u get ur IP but cant access it on laptop. Says page not available... i cant access the ATA because the IP wont work.. So frustrated!


http://www.dslreports.com/forum/r159098 ... ot-working
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2760
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: Linksys PAP2T Setup Guide

Postby Senn440 » 10/27/2017

Has anybody tried (successfully) to have 2 different phone numbers being used by the 1 adapter? Does Freephonelines allow this?
Senn440
One Hit Wonder
 
Posts: 1
Joined: 10/27/2017
SIP Device Name: Linksys PAP2T
ISP Name: Bell

Re: Linksys PAP2T Setup Guide

Postby Liptonbrisk » 10/28/2017

Senn440 wrote:Has anybody tried (successfully) to have 2 different phone numbers being used by the 1 adapter?


Sure

If your ATA makes more than 10 registration attempts in 5 minutes, you may end up being temporarily IP banned by the specific FPL server the ATA was sending registration requests to.
So, I suggest not using the same proxy on both lines. That is, if you're using voip.freephoneline.ca on Line 1, use voip2.freephoneline.ca on Line 2.
If you're using the same proxy on both lines and constantly rebooting the ATA, you may experience being temporarily IP banned more quickly.

If you have SIP ALG related issues though, then you'll be forced to use voip4.freephoneline.ca:6060 to circumvent SIP ALG.


Does Freephonelines allow this?


Yes. You'd need to buy another VoIP unlock key using a different email address.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2760
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 5 guests

cron