SPA122 Setup Guide

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

SPA122 Setup Guide

Postby Jake » 08/11/2014

Credits to Val, thank you for your help.

The attached PDF will help you set up your SPA122 device from scratch. It is a known working configuration so if you are having troubles with your SPA122 reset back to defaults and follow this guide.
Attachments
Cisco SPA122 ATA Config FreePhoneLine.pdf
(1.14 MiB) Downloaded 1916 times
User avatar
Jake
Technical Support
 
Posts: 2598
Joined: 10/18/2009

Share On:

Re: SPA122 Setup Guide

Postby Mango » 01/16/2015

To prevent one-way or no audio with the new FPL switches, set the following from within Voice >> SIP:

Handle VIA received: yes
Handle VIA rport: yes
Substitute VIA Addr: yes
Mango
Tried and True
 
Posts: 411
Joined: 08/14/2014
SIP Device Name: OBi110
Firmware Version: 1.3.0 (Build: 2824)
ISP Name: Telus
Computer OS: Windows 7
Router: Toastman Tomato

Re: SPA122 Setup Guide

Postby aha » 04/02/2016

Hi,

This is what finally helped me.

Thanks a lot. I'll post my whole story later but after trouble shooting for days and even convincing rogers to disable SIP ALG on my router, this is what actually solved my one way audio problem where the other person could hear me but I couldn't hear them. Also I wasn't able to connect to certain phone numbers after I dialed. This has also been resolved.
aha
Just Passing Thru
 
Posts: 3
Joined: 04/02/2016
SIP Device Name: Cisco SPA112
Firmware Version: 1.3.5
ISP Name: Rogers
Computer OS: Windows 10
Router: Hitron CGN3ACR


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 3 guests