3CX Softphone Config

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

3CX Softphone Config

Postby NetScr1be » 07/11/2011

Setting this phone up is pretty simple and when it's done (in Windows 7 anyway) it puts a phone.ini file in C:\Users\<UserName>\AppData\Local\3CX.

The contents of phone.ini look something like this with <variables> and [comments];

====Begin Phone.ini ====

[Profile0]
Name=<Whatever>
Enabled=1
CallerID=<ported phone#>
AuthUser=<FPL#> or <ported phone#>
AuthID=<FPL#> or <ported phone#>
AuthPass=<password> [I got this from config file e-mail]
PBXAddr=<Local IP Address of ATA>
PBXRemoteAddr=
PBXVoicemail=voip.freephoneline.ca
ServerProxy=voip.freephoneline.ca
DtmfRFC2833=1
DtmfInband=1
DtmfSipinfo=0
DtmfPayload=101
SipTransport=0
RegistrationTime=2
Codecs=PCMU;PCMA;GSM;
VideoCodecs=H.263 (ffdshow)
VideoFormats=CIF;QCIF;SQCIF;CIF4;
LocalPBX=1
RTPTransport=0
ProvisioningURL=http://voip.freephoneline.ca
UseTunnel=0
UseProxy=1
TunnelPass=abc
TunnelRemAddr=<Local IP Address of ATA>
TunnelPort=5090
PBXPort=0
STUNServer=stun.3cx.com [I remember blanking this out but there it is]
AutoProvisioning=1
VoicemailConfirmed=0
CLSID={F241A688-C69B-4183-8D45-23C35FAA6623}
[General]
VideoCamera=ASUS USB2.0 Webcam
VideoAutoSend=1
VideoSendWhenInactive=0
UseVideo=1
EchoCancellation=0
NoiseReduction=1
ActiveBLFBank=0
SndMicGUID=Primary Sound Capture Driver
SndPlayGUID=Primary Sound Driver
SndRingGUID=Primary Sound Driver
Skin=3CXPhone.cxs
ActiveProfile=-1
RunAtWinStartup=0
ShowDebugWindow=0
LangFile=
MACAddress=AD5CC7893AF4
SipTraceLog=0
LocalRecording=0
MP3Recording=0
TunnelLog=0
ExpandPlus=1
NoFocusSteal=0
OnComputerLocked=2
OnScreensaverStarts=2
SpeakerVol=0
RingingVol=0
MicVol=0
xpos=
ypos=
Brightness=-22
Contrast=133
Saturation=108
Sharpness=25
RTPFirstPort=40000
RTPLastPort=40049
LocalPort=-1
AmPmClock=0
CheckUpdates=1

====End Phone.ini ====

I only changed parameters wehere I received one from FPL. In short if it ain't broke don't try to fix it.

This works but my wife reports some audio issues [choppy]. I didn't hear anything likr that on my phone.

YMMV
NetScr1be
Just Passing Thru
 
Posts: 3
Joined: 07/11/2011
SIP Device Name: GrandStream HT287 Rev4.1
Firmware Version: Program-- 1.1.0.42
ISP Name: Acanac
Computer OS: Windows XP & 7 & Linux
Router: LinkSys WRT54G

Re: 3CX Softphone Config

Postby VoipDiy » 02/27/2012

I have been using the 3CXPhone Softphone for a few years now, with excellent results with all my BYOD VoIP providers, including Dell Voice Fongo service.

This article explains in detail how to configure the 3CXPhone to work successfully with Dell Voice Fongo SIP service on Windows 7:
http://voipdiy.blogspot.com/2012/02/usi ... phone.html

Note: If you have an ATA or IP-Phone registered to your account as well as the 3CXPhone, the last device to register with the proxy will likely be the device to ring on an incoming call. Having more than one device registered to the same account can cause unpredictability as to which device will ring.
Jeff - voipdiy
VoipDiy
Just Passing Thru
 
Posts: 22
Joined: 02/27/2012
Location: North Okanagan Valley, BC Canada
SIP Device Name: SPA2102,SPA504,SPA508,3CXPhone
ISP Name: Shaw
Computer OS: Windows 7
Router: Cisco E3000, EA6500


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 17 guests