by donmega_icecube » 02/02/2010
I followed your settings including your optional settings, still doesnt work for some reason.
i have the same device you have, Grandstream HT-503 with firmware 1.0.1.56
i changed all the settings in the FXS section exactly as you had it in your snapshots = never worked
i changed all the settings in the FXO section exactly as you had the FXS = never worked
I had an older firmware, now i updated it to the 1.0.1.56 = never worked
i opened port 5060 TCP/UDP and 5012 TCP/UDP on my router = never worked
i included a STUN server in the settings = never worked
i dont have another device to try it on. i know my device works perfectly fine, because i used it for another service previously until i canceled it.
i did notice when i go to the "Status" page, i see both FXS and FXO are "Not Registered", i dont know how to make them registered.
i'm typing the user name and password 100% correct as they are listed in the FPL account.
i also noticed another thing, after i copy/paste the "Dial Plan", if i hit update, then reboot the device, it defaults back to { x+ | *x+ } no mater how many times i tried it. that goes for both the FXS and FXO.
when i try to make a call out from the phone that is connected to this ATA adapter, within 1 second, i get a sort of a busy signal. and when i try to call my FPL number from my home or cell phone, i get to the voice mail, and it never rings.
if you can help, that would be greatly appreciated, honestly, i'm testing the service, if i'm satisfied with how it works, then i'm going to order the device you offer because i'm giving it a gift to a friend of mine, and i dont want him to be calling me for support, instead he will be calling you instead.
thanks for any help in advance.