Page 1 of 1

Linksys RTP300

PostPosted: 09/25/2009
by FONGO_steve
Enjoy

Re: Linksys RTP300

PostPosted: 04/21/2010
by 0xel
Could you please clarify the dialplan setting? there are a bunch of x's there.. what do they mean?

Re: Linksys RTP300

PostPosted: 04/22/2010
by FONGO_steve
0xel wrote:Could you please clarify the dialplan setting? there are a bunch of x's there.. what do they mean?

They simply allot for X number of digits to be entered when dialing

Re: Linksys RTP300 Firmware Version 3.2.24

PostPosted: 10/07/2011
by janexmding
I could not configurate my RTP300. It has the different interface from RTP300.zip (version 3.2.20). There is a dial tone. However, when I dial, it is always busy signal. When I call from my cell to freephoneline, it is said not available. Could you please help me to fix that? Thanks.

Re: Linksys RTP300

PostPosted: 11/21/2013
by frankv
I just wanted to confirm the preferred Codec is G729a, I've seen a different Codec configuration for other devices, so I am just trying to confirm which is the correct one.

Re: Linksys RTP300

PostPosted: 11/21/2013
by Fongo Support
frankv wrote:I just wanted to confirm the preferred Codec is G729a, I've seen a different Codec configuration for other devices, so I am just trying to confirm which is the correct one.

Hi there,

Please make sure you follow the document. Not sure why you saw that G729 is preferred codec. Document says otherwise.

Please check it.

Thanks,

Re: Linksys RTP300

PostPosted: 11/26/2013
by jenom
"why you saw "......he saw it because he has two eyes, he looked and it is there !
yes, frankv saw it correctly , on LINE 1 config page, it shows preffered codec :G729a......which is a wrong setting ....shoul be G711U for the best voice quality
enjoy your device frankv, I love those beatiful bright blue lights!

Re: Linksys RTP300

PostPosted: 11/26/2013
by Fongo Support
jenom wrote:"why you saw "......he saw it because he has two eyes, he looked and it is there !
yes, frankv saw it correctly , on LINE 1 config page, it shows preffered codec :G729a......which is a wrong setting ....shoul be G711U for the best voice quality
enjoy your device frankv, I love those beatiful bright blue lights!

Hi there,

You are right. I was comparing it against this:

viewtopic.php?f=15&t=8850

Please try to use G711 as default and not as per the document.

Sorry for all the inconvenience, I apologize.

Thanks,

Re: Linksys RTP300

PostPosted: 01/02/2014
by armia741
Not sure why you saw that G729 is preferred codec. Document says otherwise.