Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends
Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.
1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.
Please stay on topic
by jenom » 01/04/2012
On my SPA2100 Phone terminal I have my internet service provider DNS address (Primary+Secondary) in ROUTER-WAN SETUP-OPTIONAL
I used to have this device after cable modem, so it worked as router + DHCP server
Now I have another router connected to cable modem, and SPA2100 is connected after this router, (using a STUN server in setup, otherwise will not work)
Q1)Do I need to put anything into Primary & Secondary DNS fields ?
Q2)Do I need to put anything into Primary & Secondary DNS fields if I put it back after cable modem and before the router?
Thanks!
-
jenom
- Active Poster
-
- Posts: 97
- Joined: 01/03/2012
- Location: Mississauga, Ontario, Canada
- SIP Device Name: VDV21
- ISP Name: Acanac VDSL
- Computer OS: Windows 7 Ultimate
- Router: Linksys-EA6900-XWRT-VORTEX
by FONGO_steve » 01/05/2012
Please be sure to read the forum rules - as you aren't sharing a completed configuration guide I have moved your post to a more appropriate section.
Steve
Fongo
Development Support Specialist.
-
FONGO_steve
- Site Moderator
-
- Posts: 2131
- Joined: 07/16/2009
- Location: Cambridge
- SIP Device Name: Grandstream 286 & 701
- ISP Name: Worldline.ca
- Computer OS: Windows 7 Ultimate / Mac OS X
- Router: TR1043ND w/ DD-WRT Mega
- Smartphone Model: Galaxy S3
- Android Version: 4.0.4
by bridonca » 01/05/2012
jenom wrote:On my SPA2100 Phone terminal I have my internet service provider DNS address (Primary+Secondary) in ROUTER-WAN SETUP-OPTIONAL
I used to have this device after cable modem, so it worked as router + DHCP server
Now I have another router connected to cable modem, and SPA2100 is connected after this router, (using a STUN server in setup, otherwise will not work)
Q1)Do I need to put anything into Primary & Secondary DNS fields ?
Q2)Do I need to put anything into Primary & Secondary DNS fields if I put it back after cable modem and before the router?
Thanks!
It should not matter, but use google dns settings for filler. 8.8.8.8 and 8.8.4.4
-
bridonca
- Technical Support
-
- Posts: 1225
- Joined: 11/16/2009
- SIP Device Name: Netgear WGR615V
- Firmware Version: latest
- ISP Name: Eastlink
- Computer OS: XP
by jenom » 01/05/2012
sorry about posting in a wrong place
meanwhile, I emptied the both DNS fields, ....everything is still good
perhaps it would make a difference, if it would be after the cable modem....but I am not going to do that
thanks for "bridonca" for info about using google's dns.....I am going to enter it now
-
jenom
- Active Poster
-
- Posts: 97
- Joined: 01/03/2012
- Location: Mississauga, Ontario, Canada
- SIP Device Name: VDV21
- ISP Name: Acanac VDSL
- Computer OS: Windows 7 Ultimate
- Router: Linksys-EA6900-XWRT-VORTEX
Return to Device Configuration Sharing
Who is online
Users browsing this forum: No registered users and 22 guests