Cisco 7961G-GE and 7941G-GE WORKING Finally!!!

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

Cisco 7961G-GE and 7941G-GE WORKING Finally!!!

Postby rhaddad » 01/20/2013

Finally I was able to get Cisco phones 7941G-GE and 7961G-GE working on Freephoneline.

You need to setup TFTP server at your home network, you could use either Windows XP, Vista or 7. I am using 2 Windows 7 as Primary and Alternative TFTP server. For TFTP server, I am using Tftpd32 which is working like a charm!

1 - DHCP Server Setting:
I am using Google DNS which is good enough. Below is snapshot for the DHCP.
DHCP Configuration.PNG
DHCP Configuration


2 - TFTP Setting:
The below is straight forward configuration.
TFTP Configuration.PNG
TFTP Configuration


3 - File required for Cisco boot, and should be placed in the TFTP directory
Most of the below file could be found inside cmterm-7941_7961-sip.8-5-3.cop, use 7-zip to extract it. To download this file from Cisco.com you need CCO account. The files that you need to create them manually are
* dialplan.xml
* g3-tones.xml
* SEPMAC.cnf.xml
* SoftKey.xml
* XMLDefault.cnf.xml
TFTP Files.PNG
TFTP Files


4 - dialplan.xml

<DIALTEMPLATE>
<TEMPLATE MATCH="*#" Timeout="0"/>
<TEMPLATE MATCH="*" Timeout="4"/>
</DIALTEMPLATE>

5 - g3-tones.xml

<tones>
<trkLocaleName>Canada</trkLocaleName>
<trkBaseClearcaseVersion>/main/3.3.release/1</trkBaseClearcaseVersion>
<trkTranslationVersion>0</trkTranslationVersion>

<tone c1="30831" i1="-2032" c2="30467" i2="-1104" d="2" t="ringing">
<part m="on" t="2000"/>
<part m="off" t="4000"/>
<repeat c="65535"/>
</tone>
<tone c1="30467" i1="-1104" c2="28959" i2="-1404" d="2" t="reorder">
<part m="on" t="250"/>
<part m="off" t="250"/>
<repeat c="65535"/>
</tone>
<tone c1="30467" i1="-1104" c2="28959" i2="-1404" d="2" t="busy">
<part m="on" t="500"/>
<part m="off" t="500"/>
<repeat c="65535"/>
</tone>
<tone c1="30743" i1="-1384" c2="29780" i2="-1252" d="2" t="odial">
<part m="on" t="65535"/>
<repeat c="65535"/>
</tone>
<tone c1="30831" i1="-2032" c2="31538" i2="-814" d="2" t="idial">
<part m="on" t="65535"/>
<repeat c="65535"/>
</tone>
</tones>

6 - SoftKey.xml

<softKeyCfg>
<versionStamp>11cdf71b-e9bc-4559-be88-94a266766601</versionStamp>
<typeSoftKey>
<softKeyDef keyID="Redial">
<tag>1</tag>
<eventID>1</eventID>
<helpID>301</helpID>
</softKeyDef>
<softKeyDef keyID="NewCall">
<tag>2</tag>
<eventID>2</eventID>
<helpID>302</helpID>
</softKeyDef>
<softKeyDef keyID="Hold">
<tag>3</tag>
<eventID>3</eventID>
<helpID>303</helpID>
</softKeyDef>
<softKeyDef keyID="Trnsfer">
<tag>4</tag>
<eventID>4</eventID>
<helpID>304</helpID>
</softKeyDef>
<softKeyDef keyID="CfwdAll">
<tag>5</tag>
<eventID>5</eventID>
<helpID>305</helpID>
</softKeyDef>
<softKeyDef keyID="CfwdBusy">
<tag>6</tag>
<eventID>6</eventID>
<helpID>306</helpID>
</softKeyDef>
<softKeyDef keyID="CfwdNoAnswer">
<tag>7</tag>
<eventID>7</eventID>
<helpID>307</helpID>
</softKeyDef>

// back
<softKeyDef keyID="&lt;&lt;">
<tag>8</tag>
<eventID>8</eventID>
<helpID>308</helpID>
</softKeyDef>
<softKeyDef keyID="EndCall">
<tag>9</tag>
<eventID>9</eventID>
<helpID>309</helpID>
</softKeyDef>
<softKeyDef keyID="Resume">
<tag>10</tag>
<eventID>10</eventID>
<helpID>310</helpID>
</softKeyDef>
<softKeyDef keyID="Answer">
<tag>11</tag>
<eventID>11</eventID>
<helpID>311</helpID>
</softKeyDef>
<softKeyDef keyID="Info">
<tag>12</tag>
<eventID>12</eventID>
<helpID>312</helpID>
</softKeyDef>
<softKeyDef keyID="Confrn">
<tag>13</tag>
<eventID>13</eventID>
<helpID>313</helpID>
</softKeyDef>
<softKeyDef keyID="Park">
<tag>14</tag>
<eventID>14</eventID>
<helpID>314</helpID>
</softKeyDef>
<softKeyDef keyID="Join">
<tag>15</tag>
<eventID>15</eventID>
<helpID>315</helpID>
</softKeyDef>
<softKeyDef keyID="MeetMe">
<tag>16</tag>
<eventID>16</eventID>
<helpID>316</helpID>
</softKeyDef>
<softKeyDef keyID="PickUp">
<tag>17</tag>
<eventID>17</eventID>
<helpID>317</helpID>
</softKeyDef>
<softKeyDef keyID="GPickUp">
<tag>18</tag>
<eventID>18</eventID>
<helpID>318</helpID>
</softKeyDef>
// remove last conference party
<softKeyDef keyID="RmLstC">
<tag>57</tag>
<eventID>19</eventID>
<helpID>319</helpID>
</softKeyDef>
<softKeyDef keyID="Barge">
<tag>67</tag>
<eventID>21</eventID>
<helpID>321</helpID>
</softKeyDef>
<softKeyDef keyID="DirTrfr">
<tag>77</tag>
<eventID>28</eventID>
<helpID>328</helpID>
</softKeyDef>
<softKeyDef keyID="Select">
<tag>78</tag>
<eventID>29</eventID>
<helpID>329</helpID>
</softKeyDef>
<softKeyDef keyID="ConfList">
<tag>79</tag>
<eventID>30</eventID>
<helpID>330</helpID>
</softKeyDef>
<softKeyDef keyID="VidMode">
<tag>88</tag>
<eventID>33</eventID>
<helpID>333</helpID>
</softKeyDef>
<softKeyDef keyID="ImmDiv">
<tag>59</tag>
<eventID>65</eventID>
<helpID>365</helpID>
</softKeyDef>
<softKeyDef keyID="Intrcpt">
<tag>60</tag>
<eventID>66</eventID>
<helpID>366</helpID>
</softKeyDef>
<softKeyDef keyID="SetWtch">
<tag>61</tag>
<eventID>67</eventID>
<helpID>367</helpID>
</softKeyDef>
<softKeyDef keyID="TrnsfVM">
<tag>62</tag>
<eventID>68</eventID>
<helpID>368</helpID>
</softKeyDef>
<softKeyDef keyID="DND">
<tag>63</tag>
<eventID>69</eventID>
<helpID>369</helpID>
</softKeyDef>
<softKeyDef keyID="DivAll">
<tag>64</tag>
<eventID>70</eventID>
<helpID>370</helpID>
</softKeyDef>
</typeSoftKey>
<softKeySets>
<softKeySet id="On Hook">
<softKey keyID="Redial"></softKey>
<softKey keyID="NewCall"></softKey>
<softKey keyID="Intrcpt"></softKey>
<softKey keyID="DND"></softKey>
<softKey keyID="CfwdAll"></softKey>
<softKey keyID="DivAll"></softKey>
<softKey keyID="SetWtch"></softKey>
</softKeySet>
<softKeySet id="Connected">
<softKey keyID="Hold"></softKey>
<softKey keyID="EndCall"></softKey>
<softKey keyID="Intrcpt"></softKey>
<softKey keyID="ImmDiv"></softKey>
<softKey keyID="Confrn"></softKey>
<softKey keyID="ConfList"></softKey>
<softKey keyID="Trnsfer"></softKey>
<softKey keyID="TrnsfVM"></softKey>
<softKey keyID="DND"></softKey>
<softKey keyID="Select"></softKey>
<softKey keyID="Join"></softKey>
<softKey keyID="DirTrfr"></softKey>
<softKey keyID="RmLstC"></softKey>
<softKey keyID="Park"></softKey>
<softKey keyID="DivAll"></softKey>
<softKey keyID="SetWtch"></softKey>
</softKeySet>
<softKeySet id="On Hold">
<softKey keyID="Resume"></softKey>
<softKey keyID="NewCall"></softKey>
<softKey keyID="Intrcpt"></softKey>
<softKey keyID="TrnsfVM"></softKey>
<softKey keyID="ImmDiv"></softKey>
<softKey keyID="DND"></softKey>
<softKey keyID="Select"></softKey>
<softKey keyID="Join"></softKey>
<softKey keyID="DirTrfr"></softKey>
<softKey keyID="SetWtch"></softKey>
</softKeySet>
<softKeySet id="Ring In">
<softKey keyID="Answer"></softKey>
<softKey keyID="ImmDiv"></softKey>
<softKey keyID="CfwdBusy"></softKey>
<softKey keyID="TrnsfVM"></softKey>
<softKey keyID="DivAll"></softKey>
<softKey keyID="DND"></softKey>
<softKey keyID="SetWtch"></softKey>
</softKeySet>
<softKeySet id="Off Hook">
<softKey keyID="Redial"></softKey>
<softKey keyID="EndCall"></softKey>
<softKey keyID="Intrcpt"></softKey>
<softKey keyID="PickUp"></softKey>
<softKey keyID="GPickUp"></softKey>
<softKey keyID="CfwdAll"></softKey>
<softKey keyID="MeetMe"></softKey>
</softKeySet>
<softKeySet id="Connected Transfer">
<softKey keyID="Intrcpt"></softKey>
<softKey keyID="EndCall"></softKey>
<softKey keyID="Trnsfer"></softKey>
</softKeySet>
<softKeySet id="Digits After First">
<softKey keyID="&lt;&lt;"></softKey>
<softKey keyID="EndCall"></softKey>
<softKey keyID="Intrcpt"></softKey>
</softKeySet>
<softKeySet id="Connected Conference">
<softKey keyID="Intrcpt"></softKey>
<softKey keyID="EndCall"></softKey>
<softKey keyID="Confrn"></softKey>
</softKeySet>
<softKeySet id="Ring Out">
<softKey keyID="EndCall"></softKey>
<softKey keyID="Intrcpt"></softKey>
</softKeySet>
<softKeySet id="Off Hook With Feature">
<softKey keyID="Redial"></softKey>
<softKey keyID="EndCall"></softKey>
<softKey keyID="Intrcpt"></softKey>
</softKeySet>
<softKeySet id="Remote In Use">
<softKey keyID="Barge"></softKey>
<softKey keyID="NewCall"></softKey>
<softKey keyID="cBarge"></softKey>
</softKeySet>
</softKeySets>
</softKeyCfg>

7 - XMLDefault.cnf.xml

<Default>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<analogAccessPort>2002</analogAccessPort>
<digitalAccessPort>2001</digitalAccessPort>
<ethernetPhonePort>2000</ethernetPhonePort>
<mgcpPorts>
<listen>2427</listen>
<keepAlive>2428</keepAlive>
</mgcpPorts>
</ports>
<processNodeName>voip.freephoneline.ca</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
<loadInformation115 model="CP-7941">SIP41.8-5-3S</loadInformation115>
<loadInformation309 model="Cisco 7941G-GE">SIP41.8-5-3S</loadInformation309>
<loadInformation30018 model="CP-7961">SIP41.8-5-3S</loadInformation30018>
<loadInformation308 model="Cisco 7961G-GE">SIP41.8-5-3S</loadInformation308>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<idleURL></idleURL>
<informationURL></informationURL>
<messagesURL></messagesURL>
<servicesURL></servicesURL>
</Default>

8 - SEPMAC.cnf.xml

<device xsi:type="axl:XIPPhone" ctiid="Your 10-digit number">
<deviceProtocol>SIP</deviceProtocol>
<sshUserId>default</sshUserId>
<sshPassword>user</sshPassword>
<devicePool>
<dateTimeSetting>
<dateTemplate>D/M/Ya</dateTemplate>
<timeZone>Eastern Standard/Daylight Time</timeZone>
<ntps>
<ntp>
<name>NAT Server IP</name>
<ntpMode>Unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
</ports>
<processNodeName>voip.freephoneline.ca</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<sipProxies>
<backupProxy></backupProxy>
<backupProxyPort></backupProxyPort>
<emergencyProxy></emergencyProxy>
<emergencyProxyPort></emergencyProxyPort>
<outboundProxy></outboundProxy>
<outboundProxyPort></outboundProxyPort>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<callForwardURI>x--serviceuri-cfwdall</callForwardURI>
<callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
<callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
<callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
<meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
<abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
<rfc2543Hold>false</rfc2543Hold>
<callHoldRingback>2</callHoldRingback>
<localCfwdEnable>true</localCfwdEnable>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>2</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>0</dndControl>
<remoteCcEnable>true</remoteCcEnable>
</sipCallFeatures>
<sipStack>
<sipInviteRetx>6</sipInviteRetx>
<sipRetx>10</sipRetx>
<timerInviteExpires>180</timerInviteExpires>
<timerRegisterExpires>3600</timerRegisterExpires>
<timerRegisterDelta>5</timerRegisterDelta>
<timerKeepAliveExpires>120</timerKeepAliveExpires>
<timerSubscribeExpires>120</timerSubscribeExpires>
<timerSubscribeDelta>5</timerSubscribeDelta>
<timerT1>500</timerT1>
<timerT2>4000</timerT2>
<maxRedirects>70</maxRedirects>
<remotePartyID>false</remotePartyID>
<userInfo>None</userInfo>
</sipStack>
<autoAnswerTimer>1</autoAnswerTimer>
<autoAnswerAltBehavior>false</autoAnswerAltBehavior>
<autoAnswerOverride>true</autoAnswerOverride>
<transferOnhookEnabled>false</transferOnhookEnabled>
<enableVad>false</enableVad>
<preferredCodec>g711ulaw</preferredCodec>
<dtmfAvtPayload>101</dtmfAvtPayload>
<dtmfDbLevel>3</dtmfDbLevel>
<dtmfOutofBand>avt</dtmfOutofBand>
<alwaysUsePrimeLine>false</alwaysUsePrimeLine>
<alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
<kpml>3</kpml>
<natEnabled>false</natEnabled>
<natAddress></natAddress>
<phoneLabel>YourPhoneLabelNoSpaces</phoneLabel>
<stutterMsgWaiting>1</stutterMsgWaiting>
<callStats>false</callStats>
<silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
<disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
<startMediaPort>16384</startMediaPort>
<stopMediaPort>32766</stopMediaPort>
<sipLines>
<line
button="1">
<featureID>9</featureID>
<featureLabel>YourLabel</featureLabel>
<proxy>voip.freephoneline.ca</proxy>
<port>5060</port>
<name>give same value as <authName></name>
<displayName>your 10-digit caller ID</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>login name for corresponding IP line</authName>
<authPassword>login password for corresponding IP line</authPassword>
<sharedLine>true</sharedLine>
<messageWaitingLampPolicy>1</messageWaitingLampPolicy>
<messagesNumber>*98</messagesNumber>
<ringSettingIdle>4</ringSettingIdle>
<ringSettingActive>5</ringSettingActive>
<contact>your 10-digit caller Number</contact>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>false</callerNumber>
<redirectedNumber>false</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
<line
button="2">
<featureID>21</featureID>
<featureLabel>Speed Dial Name</featureLabel>
<speedDialNumber>Speed Dial Number</speedDialNumber>
</line>
</sipLines>
<voipControlPort>5060</voipControlPort>
<dscpForAudio>184</dscpForAudio>
<ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
<dialTemplate>dialplan.xml</dialTemplate>
<softKeyFile>SoftKey.xml</softKeyFile>
</sipProfile>
<commonProfile>
<phonePassword></phonePassword>
<backgroundImageAccess>true</backgroundImageAccess>
<callLogBlfEnabled>2</callLogBlfEnabled>
</commonProfile>
<loadInformation>SIP41.8-5-3S</loadInformation>
<vendorConfig>
<disableSpeaker>false</disableSpeaker>
<disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
<pcPort>0</pcPort>
<settingsAccess>1</settingsAccess>
<garp>0</garp>
<voiceVlanAccess>0</voiceVlanAccess>
<videoCapability>0</videoCapability>
<autoSelectLineEnable>0</autoSelectLineEnable>
<webAccess>0</webAccess>
<spanToPCPort>0</spanToPCPort>
<loggingDisplay>1</loggingDisplay>
<loadServer></loadServer>
</vendorConfig>
<versionStamp></versionStamp>
<userLocale>
<name>English_United_States</name>
<uid>1</uid>
<langCode>en_US</langCode>
<version>1.0.0.0-1</version>
<winCharSet>iso-8859-1</winCharSet>
</userLocale>
<networkLocale>Canada</networkLocale>
<networkLocaleInfo>
<name>Canada</name>
<uid>64</uid>
<version>1.0.0.0-1</version>
</networkLocaleInfo>
<deviceSecurityMode>1</deviceSecurityMode>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<idleURL></idleURL>
<informationURL></informationURL>
<messagesURL></messagesURL>
<proxyServerURL></proxyServerURL>
<servicesURL></servicesURL>
<dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>4</transportLayerProtocol>
<capfAuthMode>0</capfAuthMode>
<capfList>
<capf>
<phonePort>3804</phonePort>
</capf>
</capfList>
<certHash></certHash>
<encrConfig>false</encrConfig>
</device>

9 - Loading the Phone with new Firmware
Power on the phone while pressing “#”, then let go when you line buttons start flashing. Then enter the sequence “1234567890*0#”. That will initiate the reset.
Place the firmware files in your TFTP root, and let your DHCP server tell the phone where to find the TFTP server. The phone will ask for file a CTL<mac>.tlv file, ignore that, it is used for certificates or something. It will also ask for a file called XMLDefaults.cnf.xml. This file tells the phone what firmware it should load.

10 - Ports to open on your router

* 5004 to 6061 UDP
* 16384 to 32766 UDP
* 8000 to 8019 UDP

Use port range forwarding for the above, and forward it to the IP of the Cisco phone.

All the above were enough to get my Cisco phone working on Freephoneline.

Let me know if you have any questions!
rhaddad
Just Passing Thru
 
Posts: 3
Joined: 11/18/2011
SIP Device Name: Cisco 7961G-GE
Firmware Version: SIP41.8-5-3S.loads
ISP Name: Rogers, Cable
Computer OS: Windows
Router: LinkSys WRT120N

Re: Cisco 7961G-GE and 7941G-GE WORKING Finally!!!

Postby etoghi » 10/21/2015

After following all these steps I am getting Unprovisioned message on my Cisco 7941
etoghi
Just Passing Thru
 
Posts: 7
Joined: 10/21/2015
SIP Device Name: Cisco 7975
Firmware Version: SIP75.8-3-4SR1S
ISP Name: Bell
Computer OS: Windows 7
Router: DD-WRT

Re: Cisco 7961G-GE and 7941G-GE WORKING Finally!!!

Postby cineplex.1 » 04/16/2017

Did anyone actually get a cisco phone working with this service ?
cineplex.1
Just Passing Thru
 
Posts: 7
Joined: 04/15/2017


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 20 guests