service down or just me :)?
-
- One Hit Wonder
- Posts: 1
- Joined: 06/01/2015
- SIP Device Name: OBI100
No voice on outgoing calls
Hi,
I have had FFL working for many years but this morning remote caller can't hear me on outgoing calls. Incoming calls work fine. I had not changed any settings in more than 6 months before today.
I when trough the obi setup PDF from the forum and updated a few settings to match but no change. Only incoming calls have bidirectional sound.
Anything I should check? or is this an issue on the server side?
Thx
I have had FFL working for many years but this morning remote caller can't hear me on outgoing calls. Incoming calls work fine. I had not changed any settings in more than 6 months before today.
I when trough the obi setup PDF from the forum and updated a few settings to match but no change. Only incoming calls have bidirectional sound.
Anything I should check? or is this an issue on the server side?
Thx
-
- Lightly Seasoned
- Posts: 234
- Joined: 01/14/2014
- SIP Device Name: Grandstream HT-701
- Firmware Version: 1.0.10.3
- ISP Name: Teksavvy Cable
- Computer OS: Windows 10 64 bit
- Router: Linksys WRT N600 on DD-WRT
- Smartphone Model: BlackBerry Q10
- Contact:
Forwarded call dropped after 90 min
Hi,
I have FPL with the unlock key and has been working great since we purchased. I'm using the HT701 ATA, configured with the settings in the guide in these forums, and with the latest firmware. I'm eventually going to port a number from MagicJack, but for now am forwarding the calls from that number to the FPL number.
Today (and probably a handful of times in the past), I joined a conference call which dialed me at the MJ number, which then forwarded to my FPL. The call was going smoothly but dropped at the 90 min mark.
When I used MJ as the primary service, I noted drops around a similar timeframe. Is it related? I'm curious if I had the conference call the FPL number directly if the call would've continued uninterrupted.
Still, I'm wondering if there's anything I should verify on the ATA or router side. I don't have any port forwarding set up nor DMZ.
Thanks in advance!
I have FPL with the unlock key and has been working great since we purchased. I'm using the HT701 ATA, configured with the settings in the guide in these forums, and with the latest firmware. I'm eventually going to port a number from MagicJack, but for now am forwarding the calls from that number to the FPL number.
Today (and probably a handful of times in the past), I joined a conference call which dialed me at the MJ number, which then forwarded to my FPL. The call was going smoothly but dropped at the 90 min mark.
When I used MJ as the primary service, I noted drops around a similar timeframe. Is it related? I'm curious if I had the conference call the FPL number directly if the call would've continued uninterrupted.
Still, I'm wondering if there's anything I should verify on the ATA or router side. I don't have any port forwarding set up nor DMZ.
Thanks in advance!
Re: service down or just me :)?
I have the same problem. i am able to call fpl number but does not work with regular numbers.
-
- Lightly Seasoned
- Posts: 234
- Joined: 01/14/2014
- SIP Device Name: Grandstream HT-701
- Firmware Version: 1.0.10.3
- ISP Name: Teksavvy Cable
- Computer OS: Windows 10 64 bit
- Router: Linksys WRT N600 on DD-WRT
- Smartphone Model: BlackBerry Q10
- Contact:
Re: Forwarded call dropped after 90 min
I posted this as a new thread and yet it got rolled into the "service down or is it just me?" thread?mh1983 wrote:Hi,
I have FPL with the unlock key and has been working great since we purchased. I'm using the HT701 ATA, configured with the settings in the guide in these forums, and with the latest firmware. I'm eventually going to port a number from MagicJack, but for now am forwarding the calls from that number to the FPL number.
Today (and probably a handful of times in the past), I joined a conference call which dialed me at the MJ number, which then forwarded to my FPL. The call was going smoothly but dropped at the 90 min mark.
When I used MJ as the primary service, I noted drops around a similar timeframe. Is it related? I'm curious if I had the conference call the FPL number directly if the call would've continued uninterrupted.
Still, I'm wondering if there's anything I should verify on the ATA or router side. I don't have any port forwarding set up nor DMZ.
Thanks in advance!
-
- Active Poster
- Posts: 117
- Joined: 07/23/2010
- SIP Device Name: PAP2T
- Firmware Version: 5.1.6 (LS)
- ISP Name: CarryTel 25/10 DSL
- Router: pfSense i5-3470
- Location: GTA
Re: Forwarded call dropped after 90 min
I can tell you that when I was actively using MJ, every call would be terminated after 90 minutes.mh1983 wrote:Hi,
...
Today (and probably a handful of times in the past), I joined a conference call which dialed me at the MJ number, which then forwarded to my FPL. The call was going smoothly but dropped at the 90 min mark.
When I used MJ as the primary service, I noted drops around a similar timeframe. Is it related? I'm curious if I had the conference call the FPL number directly if the call would've continued uninterrupted.
Still, I'm wondering if there's anything I should verify on the ATA or router side. I don't have any port forwarding set up nor DMZ.
Thanks in advance!
I can also tell you that we can talk for more than 2 hours uninterrupted using my FPL line .
-
- Lightly Seasoned
- Posts: 234
- Joined: 01/14/2014
- SIP Device Name: Grandstream HT-701
- Firmware Version: 1.0.10.3
- ISP Name: Teksavvy Cable
- Computer OS: Windows 10 64 bit
- Router: Linksys WRT N600 on DD-WRT
- Smartphone Model: BlackBerry Q10
- Contact:
Re: Forwarded call dropped after 90 min
Bing -- many thanks for your reply! Looking forward to fully separating from the shackles of MJ.Bing Kol wrote:I can tell you that when I was actively using MJ, every call would be terminated after 90 minutes.mh1983 wrote:Hi,
...
Today (and probably a handful of times in the past), I joined a conference call which dialed me at the MJ number, which then forwarded to my FPL. The call was going smoothly but dropped at the 90 min mark.
When I used MJ as the primary service, I noted drops around a similar timeframe. Is it related? I'm curious if I had the conference call the FPL number directly if the call would've continued uninterrupted.
Still, I'm wondering if there's anything I should verify on the ATA or router side. I don't have any port forwarding set up nor DMZ.
Thanks in advance!
I can also tell you that we can talk for more than 2 hours uninterrupted using my FPL line .
can't do outbound calls
I bought the voip unlock key and installed. Problem is I can receive calls fine and also can make calls on 647 area code call but 416 and 905 area code outbound calls are not working. Please Advice.
-
- Just Passing Thru
- Posts: 2
- Joined: 06/28/2015
- SIP Device Name: Freephoneline
- ISP Name: Fullmovil
- Computer OS: Windows 7
- Router: 3g router
Why is my support question not being shown
I just made a support request, but it is not showing on the forum. Why is this?
-
- Just Passing Thru
- Posts: 20
- Joined: 12/02/2014
- SIP Device Name: ATA Grandstream Ht502
- Firmware Version: Program -- 1.0.12.1
- ISP Name: Tompson modem Cable
- Computer OS: OsX
- Router: Aiport extreme
NOT REGISTERED depuis ce matin... server down?
Modem thomson DCM 475 LAN → WAN : Grandstream ht502 → WAN : Airport extreme : HAT –DHCP
My Fx port 1 is configure with tektalk - this phone line is registered and works just fine
My Fx port2 is configure with freephone line SIP - not registered since 2015-07-01
I look at :
Difference in the configuration from the recommandation on this website : http://forum.fongo.com/viewtopic.php?f=15&t=16336
Use Random Port: is set to no
- i switch from port 5062 to 5064 : reboot : not registered
Preferred Vocoder: (in listed order): does not put PCMU at all and put G729 first
- no change apply..
2) reboot modem, ATA and router
- router is ok
Still not registered. Any help available since it was working good for 7 months...
My Fx port 1 is configure with tektalk - this phone line is registered and works just fine
My Fx port2 is configure with freephone line SIP - not registered since 2015-07-01
I look at :
Difference in the configuration from the recommandation on this website : http://forum.fongo.com/viewtopic.php?f=15&t=16336
Use Random Port: is set to no
- i switch from port 5062 to 5064 : reboot : not registered
Preferred Vocoder: (in listed order): does not put PCMU at all and put G729 first
- no change apply..
2) reboot modem, ATA and router
- router is ok
Still not registered. Any help available since it was working good for 7 months...
-
- Just Passing Thru
- Posts: 20
- Joined: 12/02/2014
- SIP Device Name: ATA Grandstream Ht502
- Firmware Version: Program -- 1.0.12.1
- ISP Name: Tompson modem Cable
- Computer OS: OsX
- Router: Aiport extreme
NOT REGISTERED since this mor... server down?
Modem thomson DCM 475 LAN → WAN : Grandstream ht502 → WAN : Airport extreme : HAT –DHCP
My Fx port 1 is configure with tektalk - this phone line is registered and works just fine
My Fx port2 is configure with freephone line SIP - not registered since 2015-07-01
I look at :
Difference in the configuration from the recommandation on this website : viewtopic.php?f=15&t=16336
Use Random Port: is set to no
- i switch from port 5062 to 5064 : reboot : not registered
Preferred Vocoder: (in listed order): does not put PCMU at all and put G729 first
- no change apply..
2) reboot modem, ATA and router
- router is ok
Still not registered. Any help available since it was working good for 7 months...
AD INFO 2015-07-02 : I'm able to register with fongo but not with my ATA...
YOUR SIP STATUS
SIP Status: connected
SIP User Agent: Fongo/Desktop 3.2.7.0
My Fx port 1 is configure with tektalk - this phone line is registered and works just fine
My Fx port2 is configure with freephone line SIP - not registered since 2015-07-01
I look at :
Difference in the configuration from the recommandation on this website : viewtopic.php?f=15&t=16336
Use Random Port: is set to no
- i switch from port 5062 to 5064 : reboot : not registered
Preferred Vocoder: (in listed order): does not put PCMU at all and put G729 first
- no change apply..
2) reboot modem, ATA and router
- router is ok
Still not registered. Any help available since it was working good for 7 months...
AD INFO 2015-07-02 : I'm able to register with fongo but not with my ATA...
YOUR SIP STATUS
SIP Status: connected
SIP User Agent: Fongo/Desktop 3.2.7.0
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: service down or just me :)?
There are no servers down.
Please try logging out and closing the desktop application.
Verify that your Register Expiration is 60 and let us know what it was if it was not.
Finally, try to change your Primary SIP Server from voip.freephoneline.ca to voip2.freephoneline.ca, or vice versa.
Let us know if that works.
Please try logging out and closing the desktop application.
Verify that your Register Expiration is 60 and let us know what it was if it was not.
Finally, try to change your Primary SIP Server from voip.freephoneline.ca to voip2.freephoneline.ca, or vice versa.
Let us know if that works.
long distance not working
Hi all,
I bought $20 world credits several days ago, I want to call China, but I can't make the long distance call. I dialed 01186412XXXXXXX, after hearing dialing tone, nothing heard anymore for several minutes. Do you guys have any idea? Thanks.
I bought $20 world credits several days ago, I want to call China, but I can't make the long distance call. I dialed 01186412XXXXXXX, after hearing dialing tone, nothing heard anymore for several minutes. Do you guys have any idea? Thanks.
-
- Just Passing Thru
- Posts: 20
- Joined: 12/02/2014
- SIP Device Name: ATA Grandstream Ht502
- Firmware Version: Program -- 1.0.12.1
- ISP Name: Tompson modem Cable
- Computer OS: OsX
- Router: Aiport extreme
Re: service down or just me :)?
logging out = done... SIP Status: disconnected but still not registerMango wrote:T
Please try logging out and closing the desktop application.
Verify that your Register Expiration is 60 and let us know what it was if it was not.
Finally, try to change your Primary SIP Server from voip.freephoneline.ca to voip2.freephoneline.ca, or vice versa.
Let us know if that works.
Register Expiration: 60 (in minutes. default 1 hour, max 45 days) = i'm keeping it
Primary SIP Server: change to voip2.freephoneline.ca = done... still not register
Since my ATA is before my router, i guest there should not be problem with the router...
other idea?
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: service down or just me :)?
Hello; thank you for the PM. I'm sorry I don't know what's wrong. We can try some general troubleshooting.
Earlier I told you to use voip2. Now please set your Primary SIP Server to voip4.freephoneline.ca:6060
Please set Local SIP Port to 26913
Please set Use Random Port to No, if it is not that way already.
Theoretically, a firmware upgrade to your cable modem, applied by your ISP, could have caused this problem. If the above works, it will support that theory.
Please double check the following settings are correct:
Account Active: Yes
SIP Transport: UDP
NAT Traversal: Keep-Alive
DNS Mode: A Record
SIP Registration: Yes
If you still have the problem, try to set your Primary SIP Server to 162.213.111.21:6060 so that you may test for DNS-related issues.
If you still have problems after trying all this, please check your Grandstream ATA's Status tab and post the WAN IP Address here. You can remove the last octet to protect your privacy.
Earlier I told you to use voip2. Now please set your Primary SIP Server to voip4.freephoneline.ca:6060
Please set Local SIP Port to 26913
Please set Use Random Port to No, if it is not that way already.
Theoretically, a firmware upgrade to your cable modem, applied by your ISP, could have caused this problem. If the above works, it will support that theory.
Please double check the following settings are correct:
Account Active: Yes
SIP Transport: UDP
NAT Traversal: Keep-Alive
DNS Mode: A Record
SIP Registration: Yes
If you still have the problem, try to set your Primary SIP Server to 162.213.111.21:6060 so that you may test for DNS-related issues.
If you still have problems after trying all this, please check your Grandstream ATA's Status tab and post the WAN IP Address here. You can remove the last octet to protect your privacy.
-
- Quiet One
- Posts: 29
- Joined: 10/23/2014
- SIP Device Name: SPA122
- Firmware Version: 1.3.5
- ISP Name: TekSavvy DSL
- Computer OS: Mac OS/Raspbian
- Router: SmartRG SR505N
- Smartphone Model: BlackBerry Passport
Re: service down or just me :)?
I am not sure I understand what your network topology looks like. How is the Grandstream infront of your router?f_laplante wrote:Mango wrote: Since my ATA is before my router, i guest there should not be problem with the router...
other idea?
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: service down or just me :)?
Modem -> Grandstream -> Router. The HT502 contains a router.
-
- Quiet One
- Posts: 29
- Joined: 10/23/2014
- SIP Device Name: SPA122
- Firmware Version: 1.3.5
- ISP Name: TekSavvy DSL
- Computer OS: Mac OS/Raspbian
- Router: SmartRG SR505N
- Smartphone Model: BlackBerry Passport
Re: service down or just me :)?
Learned something new. Guess that's like the SPA122.
-
- Just Passing Thru
- Posts: 20
- Joined: 12/02/2014
- SIP Device Name: ATA Grandstream Ht502
- Firmware Version: Program -- 1.0.12.1
- ISP Name: Tompson modem Cable
- Computer OS: OsX
- Router: Aiport extreme
Re: service down or just me :)?
Strangely, after 6 days of black out, I have been registered...Mango wrote:Hello; thank you for the PM. I'm sorry I don't know what's wrong. We can try some general troubleshooting.
Earlier I told you to use voip2. Now please set your Primary SIP Server to voip4.freephoneline.ca:6060 X
Please set Local SIP Port to 26913 X
Please set Use Random Port to No, if it is not that way already. OK
Theoretically, a firmware upgrade to your cable modem, applied by your ISP, could have caused this problem. If the above works, it will support that theory.
Please double check the following settings are correct:
Account Active: Yes OK
SIP Transport: UDP OK
NAT Traversal: Keep-Alive OK
DNS Mode: A Record OK
SIP Registration: Yes OK
If you still have the problem, try to set your Primary SIP Server to 162.213.111.21:6060 so that you may test for DNS-related issues.
If you still have problems after trying all this, please check your Grandstream ATA's Status tab and post the WAN IP Address here. You can remove the last octet to protect your privacy.
Port Hook Registration DND Forward Busy Forward Delayed Forward
FXS 1 On Hook Registered No
FXS 2 On Hook Registered No
I did not had the chance to tryout your other solution in the quote above... I did not reset the ATA for the last 3 days.
I'm keeping voip2.freephoneline.ca since it was still in place. Otherwise, I did not change anything else.
Thx Mango for tech and moral support!
-
- Just Passing Thru
- Posts: 2
- Joined: 07/09/2015
- SIP Device Name: Dlink
- Firmware Version: Dlink
- ISP Name: Cable
- Computer OS: WINDOWS 7
problème de son pour les appels sortants
Bonjour,
Lors que je fais un appel de mon ordinateur , les gens peuvent m'entendre mais moi je n'entends rien. Je n'entends même pas la sonnerie (en ligne ou occupé). Lorsque je reçois un appel, j'entends mais pas quand je passe un appel.
Avez-vous trouver une solution à ce problème ?
Laye
Lors que je fais un appel de mon ordinateur , les gens peuvent m'entendre mais moi je n'entends rien. Je n'entends même pas la sonnerie (en ligne ou occupé). Lorsque je reçois un appel, j'entends mais pas quand je passe un appel.
Avez-vous trouver une solution à ce problème ?
Laye
-
- Just Passing Thru
- Posts: 2
- Joined: 07/09/2015
- SIP Device Name: Dlink
- Firmware Version: Dlink
- ISP Name: Cable
- Computer OS: WINDOWS 7
Problème de son
Bonjour,
Lors que je fais un appel de mon ordinateur , les gens peuvent m'entendre mais moi je n'entends rien. Je n'entends même pas la sonnerie (en ligne ou occupé). Lorsque je reçois un appel, j'entends mais pas quand je passe un appel.
Avez-vous trouver une solution à ce problème ?
Laye
Lors que je fais un appel de mon ordinateur , les gens peuvent m'entendre mais moi je n'entends rien. Je n'entends même pas la sonnerie (en ligne ou occupé). Lorsque je reçois un appel, j'entends mais pas quand je passe un appel.
Avez-vous trouver une solution à ce problème ?
Laye
-
- Just Passing Thru
- Posts: 2
- Joined: 07/09/2015
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.3.5 (004p_XU001) A
- ISP Name: CIK FTTN
- Router: HG-A800(3 in 1)
freephone online VOIP no out going call
1. incoming call is fine when we just change our internet provider from Rogers to Bell fiber (CIK FNNP PROVIDER)
2. But I can't make a call outbound, I try to call my cellphone ,cellphone is ringing but can't hear from the VOIP phone .Switching from voip2.freephoneline.ca to voip.freephoneline.ca makes no difference.
3.Sometimes it is going fine. when I tried outgoing calls, it took about 1 minute until the other side can receive my call,or can't get through (took 1 minute until I canl hear the ring tone for the otherside as well ). I've tried to reset the phone adapter also the router, but nothing worked. no problems for incoming calls.
4.We followed CISCO-SPA112 Setup guide,nothing changed.
5.voip ADAPTER: Cisco SPA112; network in Toronto:CIK (bell)FTTN; MODERM: CIK TELECOM 's DSL MORDEM: HG-A800 which is multiuse for ROUTER,VOIP ATA
2. But I can't make a call outbound, I try to call my cellphone ,cellphone is ringing but can't hear from the VOIP phone .Switching from voip2.freephoneline.ca to voip.freephoneline.ca makes no difference.
3.Sometimes it is going fine. when I tried outgoing calls, it took about 1 minute until the other side can receive my call,or can't get through (took 1 minute until I canl hear the ring tone for the otherside as well ). I've tried to reset the phone adapter also the router, but nothing worked. no problems for incoming calls.
4.We followed CISCO-SPA112 Setup guide,nothing changed.
5.voip ADAPTER: Cisco SPA112; network in Toronto:CIK (bell)FTTN; MODERM: CIK TELECOM 's DSL MORDEM: HG-A800 which is multiuse for ROUTER,VOIP ATA
- Fongo Support
- Site Moderator
- Posts: 1689
- Joined: 01/01/2013
Re: freephone online VOIP no out going call
Hi,wolaiye wrote:1. incoming call is fine when we just change our internet provider from Rogers to Bell fiber (CIK FNNP PROVIDER)
2. But I can't make a call outbound, I try to call my cellphone ,cellphone is ringing but can't hear from the VOIP phone .Switching from voip2.freephoneline.ca to voip.freephoneline.ca makes no difference.
3.Sometimes it is going fine. when I tried outgoing calls, it took about 1 minute until the other side can receive my call,or can't get through (took 1 minute until I canl hear the ring tone for the otherside as well ). I've tried to reset the phone adapter also the router, but nothing worked. no problems for incoming calls.
4.We followed CISCO-SPA112 Setup guide,nothing changed.
5.voip ADAPTER: Cisco SPA112; network in Toronto:CIK (bell)FTTN; MODERM: CIK TELECOM 's DSL MORDEM: HG-A800 which is multiuse for ROUTER,VOIP ATA
Our servers are not down.
http://status.fongo.com/
The issue might be caused by the sip alg function on your new modem.
https://fccid.io/document.php?id=2050592
I think you should use voip4.freephoneline.ca:6060 on your SPA112 device.
Also- please check your caller ID name (display name)- see below:
http://support.freephoneline.ca/entries ... -supported
regards,
-
- One Hit Wonder
- Posts: 1
- Joined: 07/11/2015
invalid email
When I register one account, the system always shown the error information:"invalid email". What is the matter? How can I resolve it? Please help me.
-
- Quiet One
- Posts: 49
- Joined: 11/30/2012
- SIP Device Name: Grandstream HT701
- ISP Name: Bell Fibe
- Computer OS: Windows
- Router: Home Hub 2000
Service Down: "Devise Not Registered"?
I pickup phone and it says devise not registered. No incoming or outgoing calls. Has worked perfectly for 9 months until now. Burlington Ontario. HT701. Phone light on ata box not lit
-
- Lightly Seasoned
- Posts: 194
- Joined: 06/09/2010
- SIP Device Name: SPA3102
- Firmware Version: 5.2.13(GW002)
- ISP Name: Cogeco Cable
- Router: DPC3848VM (Modem/Router)
- Location: Burlington, Ontario
Re: "Not Registered"
I find I am having problems as well here in Burlington. ATA is registered but incoming calls are affected. Changed over to voip2 server and basically same results.
I am with FPL service so, my post is in the wrong area...but I am encountering issues and will have to try and sort them out. Been working great up until this evening, so either my hardware has gone bad or other issues are present. Disregard this post...
Thanks
I am with FPL service so, my post is in the wrong area...but I am encountering issues and will have to try and sort them out. Been working great up until this evening, so either my hardware has gone bad or other issues are present. Disregard this post...
Thanks