Page 9 of 14

Re: can't hear other side voice when make call or receive ca

PostPosted: 03/22/2015
by Mango
I'm glad to hear it's working. Out of curiosity, when did you purchase your unlock key?

Re: can't hear other side voice when make call or receive ca

PostPosted: 03/22/2015
by splinter
Mango wrote:I'm glad to hear it's working. Out of curiosity, when did you purchase your unlock key?


registered March 18
Unlock key March 19th
research / forums March 20
Ticket March 20
Auto response March 20 'blow off'
Forced registration March 20
March 21 - From remote - vpn to home network cycle voip adaptor
Joy

Seems like a nice group on the forums here plan on making a contribution or 2 as a thank-you

Congratulations to Fongo team for a positive influence into the community.

Splinter

Re: can't hear other side voice when make call or receive ca

PostPosted: 03/22/2015
by Mango
It's too bad all unlock keys don't come with "registration forced" automatically. It would save a lot of tickets and mildly annoyed customers.

One way voice

PostPosted: 03/25/2015
by raymond30
Hi I just install my SIP config for my Cisco SPA122 firm1.3.5(004. If i call another fongo user number everything work fine but if i call a non fongo number i heard nothing but the person i call can ear me.
Please can you point me in the wright direction.
Thank you

Re: can't hear other side voice when make call or receive ca

PostPosted: 03/25/2015
by Mango
Please be sure your ATA is configured as per the PDF in this thread, as well as my post below the PDF: viewtopic.php?f=15&t=16340

Re: SPA2102 (Firmware 5.2.13.004)

PostPosted: 03/27/2015
by mun33b
hi

I have my freephone online setup with SPA 2102. I just recently got the new Hitron Rogers CGN3 Modem. i changed my SIP PROXY to voip4.freephoneline.ca:6060 ....because the other proxies i didn't hear any ring tone / bell..

Everything seems to work fine..I can get incoming calls and i get outgoing calls....however when i make outgoing calls i do not hear the rings.. the party I'm calling receives the call... i just don't hear the ring tones when making a call.

Can you please help me out.

Thanks

Re: can't hear other side voice when make call or receive ca

PostPosted: 03/27/2015
by Mango
Did you set the three settings I posted in this thread? viewtopic.php?f=15&t=16198

Re: can't hear other side voice when make call or receive ca

PostPosted: 03/28/2015
by mun33b
Yes i set it up exactly like that. the problem only happened when i got the hitron modem.

Re: can't hear other side voice when make call or receive ca

PostPosted: 03/28/2015
by Mango
Try to forward UDP ports 16384-16482 to your ATA's static IP address.

If that does not work, open a ticket and ask for your account to be verified.

Re: can't hear other side voice when make call or receive ca

PostPosted: 03/28/2015
by mun33b
where do i go to open a ticket?

Re: can't hear other side voice when make call or receive ca

PostPosted: 03/28/2015
by Mango

Re: can't hear other side voice when make call or receive ca

PostPosted: 03/30/2015
by Zeev
Hardware: OBi202
SoftwareVersion 3.0.1 (Build: 4581)
SP1 Service Status
Parameter Name Value OBiTALK
Settings
Status Registered (server=208.65.240.44:5060; expire in 3319s)(UAP:0) help
PrimaryProxyServer 208.65.240.44:5060
SecondaryProxyServer Secondary Registration Not Enabled
CallState 0 Active Calls help


Unable to hear person on other line when I make a phone call. I can dial a nunber hear the dial tone and the number will be dialed.
After that I do not hear anything on the other end. Person who I call can hear me but I can't hear what they say! I have followed setup guide listed in this board

Re: can't hear other side voice when make call or receive ca

PostPosted: 03/31/2015
by Mango
Please set the following and let me know if it works, or not.

Service Providers >> ITSP Profile X >> SIP
X_DiscoverPublicAddress: Checked
X_UsePublicAddressInVia: Checked

If that does not work, open a ticket and ask for your account to be verified: http://support.fongo.com/anonymous_requests/new

Re: can't hear other side voice when make call or receive ca

PostPosted: 04/07/2015
by harry
Thanks for the message, Mango. I have a similar problem. I hear a dial tone but when I call a number i dont hear the bell ringing but the called party receives my call. when i receive a call i cannot hear anything. I am using HT701 device and my ISP is rogers. Any help would be appreciated.

Re: can't hear other side voice when make call or receive ca

PostPosted: 04/07/2015
by Mango
Thank you for posting in this thread, so that we know approximately how many users have the problem.

If you haven't already, please open a ticket: http://support.fongo.com/anonymous_requests/new

I'm sure Fongo staff will solve the problem quickly.

Re: can't hear other side voice when make call or receive ca

PostPosted: 04/07/2015
by Fongo Support
Mango wrote:Thank you for posting in this thread, so that we know approximately how many users have the problem.

If you haven't already, please open a ticket: http://support.fongo.com/anonymous_requests/new

I'm sure Fongo staff will solve the problem quickly.

Hi,

Looks like this account in question was blocked in the system for TOS violation.

I hope they will adjust their ATA settings very soon and get their account restored.

regards,

Re: can't hear other side voice when make call or receive ca

PostPosted: 04/08/2015
by harry
I got the ATA settings from congo support and now its working fine. Thanks for the help to Fongo Support and to Mango. :)))

Re: can't hear other side voice when make call or receive ca

PostPosted: 04/09/2015
by MrHarmony
Hi All,

I'm a new user with EXACTLY the same problem.

My ATA is an HT701 configured according to the PDF found here: viewtopic.php?f=15&t=16292

SIP registration seems to work OK and I can make outgoing calls and receive incoming calls, but there's no incoming sound - no ring-back and no incoming voice.

Edit: Forgot to add, I've configured my router to forward ports 5060-5065 and 10000-30000 to my ATA, and even tried putting the ATA on the DMZ, but no relief.

I did open a support ticket after reading this thread, but (as others said), just got a "blow off" message telling me I'm not eligible for any support. :(

So, what's with this "forced registration"?! Why exactly is my account in this state? How do I recover if I don't get tech support from fongo?

Many thanks for any help/advice you can offer!
David

Re: can't hear other side voice when make call or receive ca

PostPosted: 04/09/2015
by Mango
Many/most new users report this problem. You'll just have to open another ticket and hope that this time you will receive assistance.

Please remove your port forwarding and disable your DMZ. That will not affect your symptoms, because FPL is not sending any RTP at all to you.

Re: can't hear other side voice when make call or receive ca

PostPosted: 04/09/2015
by Fongo Support
Mango wrote:Many/most new users report this problem. You'll just have to open another ticket and hope that this time you will receive assistance.

Please remove your port forwarding and disable your DMZ. That will not affect your symptoms, because FPL is not sending any RTP at all to you.

Hello,

Re->You'll just have to open another ticket and hope that this time you will receive assistance.

Or you can send me a PM with your ticket#.

regards

Re: can't hear other side voice when make call or receive ca

PostPosted: 04/09/2015
by MrHarmony
@Mango & Fongo Support: I'm pleased to report that my VoIP seems to be working perfectly now. Many thanks to you both!! :D

However, I would still like to know the answers to my questions ... what is "forced registration" and why did many of us have to suffer through it? :?:

I'm sure I'm NOT alone in wondering ... thanks for any info.

David

Re: can't hear other side voice when make call or receive ca

PostPosted: 04/09/2015
by Mango
Good luck getting an answer to your question. According to reports in the forums, this problem has been happening for over two years now.

Re: can't hear other side voice when make call or receive ca

PostPosted: 04/09/2015
by MrHarmony
Mango wrote:Good luck getting an answer to your question. According to reports in the forums, this problem has been happening for over two years now.

Hmm - even more reason then, why it should be answered once and for all!! :idea:

Re: HT701 firmware 1.0.6.1

PostPosted: 04/26/2015
by Konrad
Hello,

How do you install these firmware on HT701?
Is this ATA compatible with Freephoneline?

Thanks a lot,
Konrad

Re: HT701 firmware 1.0.6.1

PostPosted: 04/28/2015
by Mango
It is compatible. But OBi ATAs have more powerful call routing features.