Badenoch wrote:Hi
I changed my modem a few days ago. Now i have no dial tone.. All the green lights are solid on the ATA just like before but i cant get a dial tone no matter what i do. The phone goes straight to vm. My freephone line account says that the SIP status is disconnected? I tried to follow the forum and get the IP address from the phone which worked but when i enter it as a search online it says the page wont open so i cant access the settings for the ATA. I called the internet provider for the modem and they said there are no blockages on the forwarding ports and that there is no firewall.
What am i doing wrong? Please help! I never had issues with previous modem... We have no other phone so its been really hard and school for the kids starts next week and we dont have any other form of communication..
Than you in advance
farzinabbasi wrote:My freelphone line voip has suddenly stopped working after a few years working. I use SPA112 telephone adapter and its setting was not changed when the problem occurred.
There is no dial tone at all. I modified the setting after reading some of the previous recommendations but I do not still have dial tone. Anyone has any suggestion how to fix this problem? Also I called Fido and asked to disable SIP ALG. It did not resolve the problem too!
farzinabbasi wrote:Registration status shows ‘Failed’. I have tried interval 120 but did not work. It is still disconnected.
Shaf77 wrote:I have been having some issues with FPL since yesterday morning.
I cannot make any outgoing calls. I get an error stating "that password is not valid".
sotojewellerydesign wrote:A voice message tells "this account is already in use" When trying to call What could be the problem?
pawlusho wrote:Read in a forum that if the desktop app of freephoneline worked properly, no problems of working with router ports would be encountered
I had read that this latest firmware was buggy and we were ready beforehand to manually download 5859 which was more stable.
Now we are not sure if we can downgrade our ATA firmware.
My son also configured that the voicemail would kick in after 15 rings after using the unlock key from freephoneline.ca
The problem is that after three phone calls hearing the ringtones on the phone connected to the Obihai , the fourth call you don t hear the ringtones, only the voicemail kicks in.
These are my equipment: VDSL with Teksavvy using a Smart RG router (Model # SR515ac), Obihai 200 with latest firmware(5898), Panasonic phone.
Also does it make a difference if you change the phone attached to the Obihai once you add a service provider or two?
pawlusho wrote:There is no ringing both at the caller's phone and the phone connected to the Obihai.
My feeling is that it is a configuration problem with the router and its ports.
pawlusho wrote:There is no ringing both at the caller's phone and the phone connected to the Obihai. When it works properly, ringing is heard at both phones. I have forwarded this post and thread to my son and I can only answer questions on what I have observed. My feeling is that it is a configuration problem with the router and its ports.
pawlusho wrote:1) In my router configuration, where do you find the UDP parameters ?
2) If the UDP parameters cannot be changed, can the NAT Keep Alive be changed to 35 instead of 20 and similarly can
the Reg Retry Intvl be changed to 185 instead of 120 for freephoneline without any serious consequences?
maxkuku wrote:My phone has busy tones and the adapter is flashing green light. Wonder service just down or only me.
pawlusho wrote:Well, everything seems to be working properly.
I wish to give LIPTONBRISK a big thank you and hope everything goes well with you healthwise.
check the Bridges between....in step 21 & 34 of my router's set-up guide
Also enable NAT
and in turn enable UPNP if you have two VOIP service providers (e.g. Google Voice and Freephoneline).
lithiumli wrote:
YOUR SIP STATUS
SIP Status: disconnected
SP2 (Optional)freephoneline.ca AccountRegister Failed: No Response From Server
SIP User Agent:
YOUR SIP SETTINGS
SIP Username: *********
SIP Password: ******
Inbound/Outbound Proxy: voip.freephoneline.ca
Registration Expires: 3600
Use Preferred Codec: G711U or G729a
Use Preferred Codec Only: No
RTP Packet Size: 0.020
Ring Tone Frequency: 52
Ring Tone Voltage: 90
rami1979 wrote:Hi there,
The modem is a WIFI enabled Smart/RG SR804n
even set the Reg Retry Intvl to 120 as stated in the topic
not sure what else to try
I'm not sure what else to try, the only thing that I can think of is when resetting it back to factory default
Users browsing this forum: Google [Bot] and 16 guests