nezhad wrote:Is freephoneline.ca gone or something? ...
nezhad wrote:...
A few days ago my phone suddenly stopped working and I can see that my SIP is disconnected.
...
nezhad wrote:Is freephoneline.ca gone or something? A few days ago my phone suddenly stopped working and I can see that my SIP is disconnected. Rebooting my OBI device multiple times did not help. I don't think it is the device since it still works with Google Voice although I know that is not a fully strong proof.
I guess I can try a softphone to check my SIP account and see if the server is still online.
thanks for any help.
Hoagiedogie wrote:I have a strange problem with my PAP2T-NA not registering after 3 years of flawless service. I use the ATA for two lines, one is Freephoneline and one is Callcentric. Callcentric on line 1, Freephoneline on line 2. the Freephoneline suddenly stopped connecting to the server a couple of weeks ago. I checked all my settings, moved the ATA to my neighbour's network (a different ISP) to test it, and nothing changed. I reset the ATA and re-loaded all the settings but freephoneline continues to fail to connect to the server, while Callcentric works flawlessly. I moved the Callcentric to line 2 and the Freephoneline to line 1 and nothing changed.
I have an I-phone app "SipFone" that continues to work perfectly thru the same network.
I tried forwarding both SIP ports, giving the ATA a Static IP and putting it into a DMZ....still nothing. I borrowed a friends SPA2102 and put my settings in, and it works perfectly, but I still cannot get the PAP2T to register to Freephoneline.
Any Ideas?
killerjay wrote:hello??????? can someone at fongo even acknowledge the issue? when is this getting fixed? ive been without a phone for 2 days now, im missing calls!
killerjay wrote:oh yea? so why is my ata still disconnecting every 2 hrs?
CharleyQ wrote:Just set up HT701 with firmware 1.0.8.2. Everything is good except the phone led keeps blinking slowly and a few fast beeping before dial tone is heard when I pick up the receiver to make calls. The recommended setting for Ring Tone Voltage is 90, but I cannot find anywhere to set it. There is a setting for Enable High Ring Power. I tested it with No" or "Yes", and the phone led links the same. In the HT701 User Manual, the definition of LEDs pattern (Table 3) for LED-19 indicates the phone led will blink when the ATA is ready to make calls. Is it normal or is there a solution to remove the fast beeping?
Fongo Support wrote:killerjay wrote:oh yea? so why is my ata still disconnecting every 2 hrs?
Hi,
re->]oh yea? so why is my ata still disconnecting every 2 hrs?
My guess is that your ata has corrupted firmware,
When was the last released fw for your ATA?
What year?
Please let us know.
regards,
Users browsing this forum: No registered users and 34 guests