Well,
After 30 min of setup I could say that I’m a new FPL user
1) I did the plugin of OBi100 and all cable (2 min)
2) I had to figure out my password. It had some zero and capital letter o something like that O0. So I had to so some test and retest (5min)
3) After I just follow the sept by sept instruction here: http://forum.fongo.com/viewtopic.php?f=15&t=3098 (10-15 min)
4) At the end, I was able to receive call but not make call so I had to open my port 5060 on my router (5 min).
5) Setup done and working !!!!
6) However, I have one small problem and I could not find anything here in the search function. When I was testing the telephone, I was speaking to my wife using my mobile and she was using the actual telephone. The conversation was not instantaneous…that was probably a 0.5 to 1 second delay. I’m sure there here a value somewhere in my ATA that I could change to fix this problem.
7) When #6 will be fix, I will transfer my current phone # and voila….Freephone !!!
8) I have highspeed internet so this should not be a problem.
Someone have any idea of what will cause this delay. It was annoying that the conversation had some delay (like if she was in japan and I was in Canada)
Thanks
It's working but latency probleme
-
- Active Poster
- Posts: 77
- Joined: 09/23/2014
- SIP Device Name: OBi110
- ISP Name: Bell Fibre 25/25
- Router: Bell Home Hub 2000
- Fongo Support
- Site Moderator
- Posts: 1689
- Joined: 01/01/2013
Re: It's working but latency probleme
Hi there,maximebeauvais wrote:Well,
After 30 min of setup I could say that I’m a new FPL user
1) I did the plugin of OBi100 and all cable (2 min)
2) I had to figure out my password. It had some zero and capital letter o something like that O0. So I had to so some test and retest (5min)
3) After I just follow the sept by sept instruction here: http://forum.fongo.com/viewtopic.php?f=15&t=3098 (10-15 min)
4) At the end, I was able to receive call but not make call so I had to open my port 5060 on my router (5 min).
5) Setup done and working !!!!
6) However, I have one small problem and I could not find anything here in the search function. When I was testing the telephone, I was speaking to my wife using my mobile and she was using the actual telephone. The conversation was not instantaneous…that was probably a 0.5 to 1 second delay. I’m sure there here a value somewhere in my ATA that I could change to fix this problem.
7) When #6 will be fix, I will transfer my current phone # and voila….Freephone !!!
8) I have highspeed internet so this should not be a problem.
Someone have any idea of what will cause this delay. It was annoying that the conversation had some delay (like if she was in japan and I was in Canada)
Thanks
For #6-
Please see below:
From OBI website:
Make this default setting: OBi's Ethernet ports to 100 mb/s full duplex
http://www.obitalk.com/forum/index.php?topic=3788.0
reference from below thread:
http://www.obitalk.com/forum/index.php?topic=5017.0
Kindly try my suggestion and let me know.
Thanks,
-
- Active Poster
- Posts: 77
- Joined: 09/23/2014
- SIP Device Name: OBi110
- ISP Name: Bell Fibre 25/25
- Router: Bell Home Hub 2000
Re: It's working but latency probleme
thank you for you reply.
my setup was at 10mb/s
I changed it to 100mb/s and now it working almost fine....not 100% fine but enought to have a fluid conversation.
thanks
PS: I just ordered my phone transfer
my setup was at 10mb/s
I changed it to 100mb/s and now it working almost fine....not 100% fine but enought to have a fluid conversation.
thanks
PS: I just ordered my phone transfer