settings for block sip port country?

[texh]

hello
i want to ask what settings should i put to get my freephoneline acc to run on blocked port country internet..
i have bought the key but cant get it connected because sip ports are blocked.
please give me brief step wise guide to how to fix this

thanks

[Mango]

You could try using voip4.freephoneline.ca on port 6060. Be sure to also change your X_UserAgentPort away from 5060.

http://forum.fongo.com/viewtopic.php?f=15&t=16196

[texh]

same issue.. i tried your settings and my phone is registered on block country and i can make calls fine with clear audio..
but when someone call me it disconnects after half a ring.. before u even get a chance to pickup the phone..
pls solution.....
in real need here...

screenshot of setting: http://i.imgur.com/denH6yX.png

thanks

[bridonca]

I am not sure if your port 6060 is being blocked. You might be having issues with your RTP port. I forget what the Obihai ATA uses for an RTP port, but change it to something else, and see what happens. Do you have access to the router? If you do, forward the changes RTP port to the ATA

Make sure the modem, router, and ATA are powered down after you do these settings changes, because sometimes these new settings do not take until you power down.

[texh]

thanks for the reply
no port 6060 is open from my ISP
what is rtp port n how u change it?
yes i do have access to the router and to obi settings...

Full settings uploaded on this album.. pls check and help out

http://imgur.com/a/BeXXb

thanks

[Mango]

This is a very different issue than the one you reported in your first post.

If your phone stops ringing before you have picked it up, the problem would not be related to RTP - as RTP is only established after the call is answered.

If no one here is able to solve your problem, I suggest you post to the OBiTALK forum: http://www.obitalk.com/forum/index.php?board=3.0