FPL support pls URGENTLY reply:
- cisco spa112
worked well , suddenly line's total shut down.
Restarted spa112
Got back working OUTGOING ONLY, but incoming still do not work (incoming call goes to FPL vm: " ... not available, pleas leave a vm ..")
Trying to test on Bria:
- It worked both outgoing and incoming, with intermittent "can't register" with 486 error code.
----------------------
Why is incoming not working via spa112 ?
incoming does not work while outgoing does.
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: incoming does not work while outgoing does.
I suggest you factory reset your ATA and configure as per the official guide: http://forum.fongo.com/viewtopic.php?f=15&t=16206
You didn't mention your router or ISP. If you use Rogers, or if your router has a SIP ALG, you may want to try the Rogers proxy: voip4.freephoneline.ca:6060.
Give that a shot, then let us know how things go. If your service still isn't working, let us know whether or not your device is registered.
You didn't mention your router or ISP. If you use Rogers, or if your router has a SIP ALG, you may want to try the Rogers proxy: voip4.freephoneline.ca:6060.
Give that a shot, then let us know how things go. If your service still isn't working, let us know whether or not your device is registered.