Hello guys need help with setting my ATA on bell fibe internet
i was using Rogers cable internet and my ATA was working fine
I just switched to bell Fibe internet and need to setup sipura VOIP ATA to work bell home hub 3000
bell home hub 3000 with sipura ATA
- bedihardeep
- Quiet One
- Posts: 47
- Joined: 10/06/2010
- SIP Device Name: SPA 1001
- Firmware Version: 2.0.1
- ISP Name: Bell Fibe
- Computer OS: windows 10 Pro
- Router: bell homehub 3000
- Location: Brampton ,Canada
Re: bell home hub 3000 with sipura ATA
If you were using the special Rogers sip server before, the only thing you really should need to change is that.
http://support.freephoneline.ca/hc/en-u ... /212430746
I.E.
Change voip4.freephoneline.ca:6060 for voip.freephoneline.ca
Everything else should be the same.
http://support.freephoneline.ca/hc/en-u ... /212430746
I.E.
Change voip4.freephoneline.ca:6060 for voip.freephoneline.ca
Everything else should be the same.
- bedihardeep
- Quiet One
- Posts: 47
- Joined: 10/06/2010
- SIP Device Name: SPA 1001
- Firmware Version: 2.0.1
- ISP Name: Bell Fibe
- Computer OS: windows 10 Pro
- Router: bell homehub 3000
- Location: Brampton ,Canada
Re: bell home hub 3000 with sipura ATA
ok thanks is there any where i need to change rogers server address to bell or it should be fineJake wrote:If you were using the special Rogers sip server before, the only thing you really should need to change is that.
http://support.freephoneline.ca/hc/en-u ... /212430746
I.E.
Change voip4.freephoneline.ca:6060 for voip.freephoneline.ca
Everything else should be the same.
Re: bell home hub 3000 with sipura ATA
I don't see why a Bell connection wouldn't work on the SIP server that was setup for certain Roger's modems. It should be fine, but non the less I would probably just double check the server address inside the ATA and make sure it is just using voip.freephoneline.ca
You will find out soon enough if it works or not
You will find out soon enough if it works or not
- bridonca
- Technical Support
- Posts: 1225
- Joined: 11/16/2009
- SIP Device Name: Netgear WGR615V
- Firmware Version: latest
- ISP Name: Eastlink
- Computer OS: XP
Re: bell home hub 3000 with sipura ATA
The Bell home hub 3000 seems to have issues with SIP devices, at least that is what a quick google is telling me. No idea on a fix, though switching the default SIP ports probably would not hurt
- Liptonbrisk
- Technical Support
- Posts: 2772
- Joined: 04/26/2010
- SIP Device Name: Obihai 202/2182, Groundwire
- Firmware Version: various
- ISP Name: FTTH
- Computer OS: Windows 64 bit
- Router: Asuswrt-Merlin & others
Re: bell home hub 3000 with sipura ATA
PPoE login should be done in bedihardeep's Linksys EA6400 router--and not the Bell Hub. That is, ensure the Bell Hub is in bridge mode: http://forums.redflagdeals.com/please-s ... r-1993629/. You don't want a double NAT situation, and you want to bypass any SIP ALG function in the Bell Hub.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at http://forum.fongo.com/viewforum.php?f=15.