phone stopped working 3 weeks ago, linksys pap2t power led continue Blinking in red, pattern is <short, short, long, long, long, short, short, off for 2 seconds>.
ping the device ok, but not able to access the web interface of the device. IVR doesn't work(press ****, no response). please advise.
phone stop working weeks ago, linksys pap2t power led Blink
- Fongo Support
- Site Moderator
- Posts: 1689
- Joined: 01/01/2013
Re: phone stop working weeks ago, linksys pap2t power led Bl
Hi,lijun5566 wrote:phone stopped working 3 weeks ago, linksys pap2t power led continue Blinking in red, pattern is <short, short, long, long, long, short, short, off for 2 seconds>.
ping the device ok, but not able to access the web interface of the device. IVR doesn't work(press ****, no response). please advise.
Perhaps this might help you:
https://www.youtube.com/watch?v=gVnIhbXZeRY
If not, you might need a new device.
Thanks,
-
- Just Passing Thru
- Posts: 3
- Joined: 09/09/2017
- SIP Device Name: linksys PAP2T
- ISP Name: tecksavvvy
Re: phone stop working weeks ago, linksys pap2t power led Bl
Thanks! the blinking pattern is different, my one is 2-3-2, the one you give is 3-2-3. but I will give it a try, will the settings also lost?
-
- Just Passing Thru
- Posts: 3
- Joined: 09/09/2017
- SIP Device Name: linksys PAP2T
- ISP Name: tecksavvvy
Re: phone stop working weeks ago, linksys pap2t power led Bl
when I try to upgrade I got message "upgrade failed: no response from spa".
does that mean I need new device? if so do you have recommendations which device I can have? and what is the step to setup?
thanks!
Jun
does that mean I need new device? if so do you have recommendations which device I can have? and what is the step to setup?
thanks!
Jun
- Fongo Support
- Site Moderator
- Posts: 1689
- Joined: 01/01/2013
Re: phone stop working weeks ago, linksys pap2t power led Bl
Hi,lijun5566 wrote:when I try to upgrade I got message "upgrade failed: no response from spa".
does that mean I need new device? if so do you have recommendations which device I can have? and what is the step to setup?
thanks!
Jun
Your spa and your PC need to be connected to same router...
Please try that also try with a different power supply.
If you are planning to get a new device, any decent device will work. Guides are below:
http://forum.fongo.com/viewforum.php?f=15