marginal wrote:I'd appreciate if there was the same for the newer version firmware of the HT-286, which becomes the HT-287 ...
Thanks.
marginal wrote:There are some settings that are missing in the HT-286 interface though.
laurent wrote:2. In-audio is not recommended under most circumstances. Only very high quality/bitrate audio codecs are capable of transporting the sound of DTMF reliably, and even still, it's guess at best. You need out of band DTMF, either SIP INFO or the RFC one.
3. Can the 286 self-update? The Grandstream 502 does that, so all you need to do is set the IP address of grandstream's firmware server and your device updates itself. Check the manual of your 286 for the exact parameters (if it supports it), but in essence, you set the method to HTTP and the server to 72.172.83.110. (See: http://www.grandstream.com/firmware.html)
tigerking wrote:laurent wrote:
Anyone can share the user experience of which ATA will work for sure with FPL for all the features?
I don't want to spend another 50 to 60 bucks and end up stuck in the same situation.
tigerking wrote:Grandstream HT 286 My ATA is very old (I bought it in 2005) and it may be the time to buy a new one.
Funkytown wrote:
Ok I have both models GrandStream HT-502 & HT-286 .. tested both with FPL (SIP INFO) on both models its always selected and they work flawlessly
Return to Device Configuration Sharing
Users browsing this forum: No registered users and 23 guests