http://www.montrealcommunity.net/Thread ... 00-OneLineIf you have any questions regarding the configuration, please do not be afraid to ask questions by posting a reply here on FreePhoneLine forum.
Sipura SPA3000 OneLine
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.
1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.
Please stay on topic
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.
1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.
Please stay on topic
-
Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Sipura SPA3000 OneLine
I found this and the only thing you need to do is fill in your FreePhoneLine settings where it is "red" if this helps anyone.
http://www.montrealcommunity.net/Thread ... 00-OneLine
If you have any questions regarding the configuration, please do not be afraid to ask questions by posting a reply here on FreePhoneLine forum.
http://www.montrealcommunity.net/Thread ... 00-OneLineIf you have any questions regarding the configuration, please do not be afraid to ask questions by posting a reply here on FreePhoneLine forum.
-
dgreengod
- One Hit Wonder
- Posts: 1
- Joined: 12/26/2010
- SIP Device Name: Sipura SPA-3000 1 FXO 1 FXS
- ISP Name: Teksavvy
- Router: Cisco
Re: Sipura SPA3000 OneLine
Hi.
I have SPA-3000 One port, unable to register - get "Registration State: Failed" message.
everything works fine with softphone, NAT ports forwarded correctly.
Tried port 5060 & 5061
username: my phone # (1613xxxxxx) with no suffixes.
password - my password
server: voip.freephoneline.ca
Any ideas / suggestions ?
Thank you in advance !
I have SPA-3000 One port, unable to register - get "Registration State: Failed" message.
everything works fine with softphone, NAT ports forwarded correctly.
Tried port 5060 & 5061
username: my phone # (1613xxxxxx) with no suffixes.
password - my password
server: voip.freephoneline.ca
Any ideas / suggestions ?
Thank you in advance !
-
dibsmft
- *Go-To Guy*
- Posts: 651
- Joined: 05/11/2011
- SIP Device Name: Yealink T22 (SPA3102 GS286)
- Firmware Version: 7.60.0.110
- ISP Name: Bell-Aliant DSL
- Computer OS: Linux Mint
- Router: Speedstream 6520
- Smartphone Model: Google Nexus 5
- Android Version: 3.2.1
- Location: St. John's NL
Re: Sipura SPA3000 OneLine
First make sure that you have activated the FXS line on the ATA ... if not activate it and try again to register.
If you are running your computer and the SPA-3000 on the same network at the same time you probably have a little configuration to do depending on the NAT type that you have. Start by giving the computer and the SPA fixed internal IP addresses. Then forward (from your router) port 5061 UDP to the ATA as well as the recommended (by FPL) RTP ports or say 8000 - 8010 UDP to the ATA IP address. You can forward port 5062 UDP to the computer as well as some other ports for RTP . At this stage your ATA should be able to register with a voip provider. If it stills refuses to register then try running STUN (stun.ekiga.net will do) and try again.
If you are running your computer and the SPA-3000 on the same network at the same time you probably have a little configuration to do depending on the NAT type that you have. Start by giving the computer and the SPA fixed internal IP addresses. Then forward (from your router) port 5061 UDP to the ATA as well as the recommended (by FPL) RTP ports or say 8000 - 8010 UDP to the ATA IP address. You can forward port 5062 UDP to the computer as well as some other ports for RTP . At this stage your ATA should be able to register with a voip provider. If it stills refuses to register then try running STUN (stun.ekiga.net will do) and try again.
-
Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Re: Sipura SPA3000 OneLine
Url ChangedFunkytown wrote:I found this and the only thing you need to do is fill in your FreePhoneLine settings where it is "red" if this helps anyone.
If you have any questions regarding the configuration, please do not be afraid to ask questions by posting a reply here on FreePhoneLine forum.
http://www.montrealcommunity.com/Thread ... 00-OneLine