Grandstream HT-286

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

Re: Grandstream HT-286

Postby ofty123 » 11/30/2012

Thank you very much. That did the trick :)

One last issue.. I can't seem to be able to forward my calls, even before I added my ATA device. When I enable the follow me feature, it goes directly to voice mail, weather I choose simultaneous or sequential. My number is ported, not sure if that's the issue, but my friend has another number with freephoneline that was not ported and the feature works perfectly... can you please help? is it from my end or not? any help is greatly appreciated.
ofty123
Just Passing Thru
 
Posts: 4
Joined: 11/23/2012

Re: Grandstream HT-286

Postby truufseir » 08/08/2013

FONGO_steve wrote:Configuration settings for the Grandstream HandyTone HT-286

I am not receiving any answer from my ata after it rings my phone the line is just blank when i pick up the ata is saying that it is registered and i am making outgoing calls no problem any idea what the problem is?
truufseir
Just Passing Thru
 
Posts: 2
Joined: 08/08/2013
SIP Device Name: obi200
Firmware Version: 3.2.2 (Build: 8680E}
ISP Name: rogers cable
Computer OS: windows 11
Router: tplink ax5400 archer 73

Previous

Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 14 guests