OBi100 Setup Guide

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

OBi100 Setup Guide

Postby Jake » 06/28/2014

Credits to cyberic68, thank you for your help.

The attached PDF will help you set up your OBi100 device from scratch. It is a known working configuration so if you are having troubles with your OBi100 reset back to defaults and follow this guide.

Edit by LiptonBrisk: Navigate to Service Providers-->ITSP Profile (FPL)-->SIP
RegisterRetryInterval should be 120 seconds.
https://support.freephoneline.ca/hc/en- ... /212430746
And then do what Mango wrote below.
Attachments
Updated OBi100 Guide.pdf
(1.34 MiB) Downloaded 3924 times
User avatar
Jake
Technical Support
 
Posts: 2823
Joined: 10/18/2009

Prevent calls arriving with caller ID such as 100 or 1001

Postby Mango » 01/16/2015

To prevent calls arriving with caller ID such as 100 or 1001, if the calls do not appear in your call logs on the Freephoneline website, use the following procedure:

1) If you use your router to forward ports to your OBi ATA, remove your port forwarding unless things won't work any other way. If your router has an option like "strict UDP session control", enable it, and/or configure its firewall to be as secure as possible. You are receiving these calls because your router's firewall is insecure.

2) Navigate to Voice Services >> SPx Service. Set X_UserAgentPort to a random number between 20000 and 65535. This will make it more difficult for the scanners to find you. If you must forward ports, you will need to update your port forward.

3) Also from within Voice Services >> SPx Service, set X_InboundCallRoute to {>1xxxxxxxxxx:ph}
If the scanners do find you, this will cause your OBi to reject the call. (Note: replace 1xxxxxxxxxx with your FPL number.)
Mango
Tried and True
 
Posts: 411
Joined: 08/14/2014
SIP Device Name: OBi110
Firmware Version: 1.3.0 (Build: 2824)
ISP Name: Telus
Computer OS: Windows 7
Router: Toastman Tomato

Re: OBi100 Setup Guide

Postby WilliamY » 11/22/2015

The digit map was wrong in the PDF, instead of 011xxxxxxxxxxxx. it should be 011xx. or you can't make international calls to some countries that take 011 + 10 digit phone#.
WilliamY
Quiet One
 
Posts: 49
Joined: 09/26/2011
SIP Device Name: Obi200
Firmware Version: 3.0.1 (Build: 4550)
ISP Name: Rogers
Computer OS: Windows 7
Router: Asus RT-N66U with Tomato
Smartphone Model: Samsung Note2
Android Version: 4.1.2

Re: OBi100 Setup Guide

Postby bogolisk » 11/24/2015

Code28: *95, Blind Transfer, coll($Bbxrn)


My obi keeps complaining (in syslog): Unknown Variable $Bbxrn
bogolisk
One Hit Wonder
 
Posts: 1
Joined: 11/24/2015
SIP Device Name: obi200
ISP Name: Connect
Computer OS: Ubuntu Linux
Router: RT-N16 (Merlin AsusWrt)

Re: Prevent calls arriving with caller ID such as 100 or 100

Postby Equinox » 03/12/2016

If I follow the instruction, the call is forwarded to my voicemail. But if I roll back to the default setting, the call is in without problem.
I am using Obi200.

Mango wrote:3) Also from within Voice Services >> SPx Service, set X_InboundCallRoute to {>1xxxxxxxxxx:ph}
If the scanners do find you, this will cause your OBi to reject the call. (Note: replace 1xxxxxxxxxx with your FPL number.)
Equinox
Just Passing Thru
 
Posts: 2
Joined: 02/26/2016

Re: Prevent calls arriving with caller ID such as 100 or 100

Postby mh1983 » 03/13/2016

Equinox wrote:If I follow the instruction, the call is forwarded to my voicemail. But if I roll back to the default setting, the call is in without problem.
I am using Obi200.

Mango wrote:3) Also from within Voice Services >> SPx Service, set X_InboundCallRoute to {>1xxxxxxxxxx:ph}
If the scanners do find you, this will cause your OBi to reject the call. (Note: replace 1xxxxxxxxxx with your FPL number.)


Am not familiar with the Obi ATAs, but the guide/directions in this thread is for the 100, not 200.
mh1983
Lightly Seasoned
 
Posts: 234
Joined: 01/14/2014
SIP Device Name: Grandstream HT-701
Firmware Version: 1.0.10.3
ISP Name: Teksavvy Cable
Computer OS: Windows 10 64 bit
Router: Linksys WRT N600 on DD-WRT
Smartphone Model: BlackBerry Q10

Re: OBi100 Setup Guide

Postby Mango » 03/13/2016

The syntax is the same for all models.
Mango
Tried and True
 
Posts: 411
Joined: 08/14/2014
SIP Device Name: OBi110
Firmware Version: 1.3.0 (Build: 2824)
ISP Name: Telus
Computer OS: Windows 7
Router: Toastman Tomato

Re: OBi100 Setup Guide

Postby Equinox » 03/13/2016

Mango wrote:The syntax is the same for all models.

Exactly. Obi200 settting is almost identical as 100 except System Management->Network Settings becomes "WAN Settings". See attached image.
In addition, I am trying to change the admin password. But after reboot, the device still takes the default one. Not sure if it is a bug or not.
Image
Equinox
Just Passing Thru
 
Posts: 2
Joined: 02/26/2016

Re: OBi100 Setup Guide

Postby mh1983 » 03/13/2016

Good to know -- my bad!
mh1983
Lightly Seasoned
 
Posts: 234
Joined: 01/14/2014
SIP Device Name: Grandstream HT-701
Firmware Version: 1.0.10.3
ISP Name: Teksavvy Cable
Computer OS: Windows 10 64 bit
Router: Linksys WRT N600 on DD-WRT
Smartphone Model: BlackBerry Q10

Re: OBi100 Setup Guide

Postby Liptonbrisk » 10/03/2016

Equinox wrote:In addition, I am trying to change the admin password. But after reboot, the device still takes the default one. Not sure if it is a bug or not.


OBi200/202 setup guide can be found at viewtopic.php?f=15&t=18805

You'll want to look at page 12 of the .pdf file.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2764
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: OBi100 Setup Guide

Postby siyano » 05/14/2017

I have been sent here but I don't think its the right troubleshooting for me, this help for network and (real?) phone management
but im using the program and direct connection
siyano
Just Passing Thru
 
Posts: 7
Joined: 09/11/2015
ISP Name: cable
Computer OS: windows 7

Re: OBi100 Setup Guide

Postby Liptonbrisk » 05/14/2017

siyano wrote:I have been sent here but I don't think its the right troubleshooting for me


It's not. This thread has nothing to do with the FPL desktop app, but you never explained what you were using when you posted either (always post router brand and model in addition to whether you're using the FPL desktop app).
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2764
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 15 guests