can't hear other side voice when make call or receive call
-
- Just Passing Thru
- Posts: 3
- Joined: 04/26/2015
- SIP Device Name: Grandstream HT701
- Firmware Version: 1.0.6.1
- Computer OS: Windows 7
- Router: Smart RG SR505N
Re: HT701 firmware 1.0.6.1
Hi Mango,
First of all thank you for your answer. I am glad to know that I can use this modem.
I am having trouble trying to configurate it in terms that it doesn't keep the settings. What I mean is that follow the steps from the pdf sent by fongo but at the end after applying the settings, when i reboot the Grandstream, everything comes back to the orginal values. (Including the phone number).
I have the number ported already by FPL but when I reboot, the number comes back to 1 289 ****as mentioned on the PM sent to you.
Is there possible to check if the number has been really ported? ( 1 905 ****- as mentioned on the PM sent to you. )
Thank you,
Konrad
First of all thank you for your answer. I am glad to know that I can use this modem.
I am having trouble trying to configurate it in terms that it doesn't keep the settings. What I mean is that follow the steps from the pdf sent by fongo but at the end after applying the settings, when i reboot the Grandstream, everything comes back to the orginal values. (Including the phone number).
I have the number ported already by FPL but when I reboot, the number comes back to 1 289 ****as mentioned on the PM sent to you.
Is there possible to check if the number has been really ported? ( 1 905 ****- as mentioned on the PM sent to you. )
Thank you,
Konrad
-
- One Hit Wonder
- Posts: 1
- Joined: 05/04/2015
- SIP Device Name: ATA Box: Cisco SPA2102
- Firmware Version: 10.2.10
- ISP Name: Teksavvy
- Computer OS: windows7
- Router: Asus RT-N14U
- Location: ontario canada
SPA2102 one way audio
I am using Teksavy cable internet service with Thomson modem.
After getting new Unlock Key and hours of testing I encountered issues with Audio.
Outbound calls have only outbound audio.
But Inbound calls are able to communicate both ways.
Is anything needs to be done on the providers site ?
Please advise.
bkoz
After getting new Unlock Key and hours of testing I encountered issues with Audio.
Outbound calls have only outbound audio.
But Inbound calls are able to communicate both ways.
Is anything needs to be done on the providers site ?
Please advise.
bkoz
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: can't hear other side voice when make call or receive ca
Be sure your device is configured as per the official guide: http://forum.fongo.com/viewtopic.php?f=15&t=16198
If it is configured correctly, open a ticket: http://support.fongo.com/anonymous_requests/new
Send Fongo Support a PM with the ticket number: http://forum.fongo.com/memberlist.php?m ... ile&u=7852
If it is configured correctly, open a ticket: http://support.fongo.com/anonymous_requests/new
Send Fongo Support a PM with the ticket number: http://forum.fongo.com/memberlist.php?m ... ile&u=7852
-
- Active Poster
- Posts: 141
- Joined: 08/19/2009
- SIP Device Name: Linksys spa-3102
- ISP Name: ADSL Acanac
- Router: D-Link DIR-615
- Smartphone Model: HTC Wildfire S
bad voice
It has been now several years that i am using Freephonline, in general without any big issues, recently even if i increased my internet speed, when i am on a call the other person on the call says that my voice is cutting and that they do not understand,but i hear well their voice, any clues how to fix that ?
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: bad voice
This issue is probably caused by some other device on your network using too much bandwidth. If my guess correct, setting up QoS in your router, or upgrading your router to one that supports Tomato Firmware (and thus QoS) will solve the problem.
The other possibility is that there is jitter between you and FPL. You can test this with Ping.
The other possibility is that there is jitter between you and FPL. You can test this with Ping.
- bridonca
- Technical Support
- Posts: 1225
- Joined: 11/16/2009
- SIP Device Name: Netgear WGR615V
- Firmware Version: latest
- ISP Name: Eastlink
- Computer OS: XP
Re: bad voice
Are you really using a DIR-615 as a router with the default firmware? And you got working VOIP? If so, I am thoroughly impressed you got the success you had! The DIR-615 has a notorious reputation of being SIP VOIP unfriendly using default firmware. I had to flash my DIR-615 with DD-WRT to make it VOIP friendly, and then after 6 months the wireless died on the router. The Broadcom based E900 with DD-WRT I replaced it with became a much better alternative, rock solid!mohnashaat wrote:It has been now several years that i am using Freephoneline, in general without any big issues, recently even if i increased my internet speed, when i am on a call the other person on the call says that my voice is cutting and that they do not understand,but i hear well their voice, any clues how to fix that ?
I will also put in my usual rant about Cisco VOIP hardware being the most unfriendly gear out there needing perfect configuration to get working properly, but that is becoming a broken record.
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: can't hear other side voice when make call or receive ca
In my experience, most things need to be configured correctly, in order to work properly.
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: SPA2102 one way audio
Hi bkoz, how are things going?bkoz wrote:Outbound calls have only outbound audio.
But Inbound calls are able to communicate both ways.
-
- One Hit Wonder
- Posts: 1
- Joined: 05/10/2015
- SIP Device Name: PAP2G
- ISP Name: TEKSAVVY
- Router: Linksys WRT54hl
One Way Audio
Hello,
I am having issue hearing audio (incoming audio) but outgoing is fine. I have already port forward 5062-5070 (5062 is assigned) and 16000-17000 UDP
ROuter: Linksys wrt54GL
ATA: PAP2t-na
Any suggestion is appreciated.
I am having issue hearing audio (incoming audio) but outgoing is fine. I have already port forward 5062-5070 (5062 is assigned) and 16000-17000 UDP
ROuter: Linksys wrt54GL
ATA: PAP2t-na
Any suggestion is appreciated.
- Attachments
-
- voip.JPG (26.35 KiB) Viewed 62133 times
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: can't hear other side voice when make call or receive ca
Please configure your PAP2T as per the official guide, including my post below the official guide: http://forum.fongo.com/viewtopic.php?f=15&t=16294
Once done, you should be able to remove your port forwarding.
I see that someone on the other forum also had this problem, and uses the same hardware combination as you. If that was you, then you can ignore this post.
Once done, you should be able to remove your port forwarding.
I see that someone on the other forum also had this problem, and uses the same hardware combination as you. If that was you, then you can ignore this post.
Re: can't hear other side voice when make call or receive ca
So I couple of days ago I bought a new DLINK router DIR-880L and I was able to use my freephoneline.ca service.
Last night i upgraded the routers firmware to DD-WRT
Well today if i try calling some one they can hear me, but i cant hear them?
I've tried opening UDP port 5060-6060 and 16384 to 16482 still cant hear them.
I tried added my ATA ip to DMZ still cannot hear them
I tried turning off DNSMasq same thing
I'm with TekSavvy, DLink DIR-880L and Cisco SPA112
Is there anything else left for me to try ?
Edit **Added STUN Server** Fixed issue.
Last night i upgraded the routers firmware to DD-WRT
Well today if i try calling some one they can hear me, but i cant hear them?
I've tried opening UDP port 5060-6060 and 16384 to 16482 still cant hear them.
I tried added my ATA ip to DMZ still cannot hear them
I tried turning off DNSMasq same thing
I'm with TekSavvy, DLink DIR-880L and Cisco SPA112
Is there anything else left for me to try ?
Edit **Added STUN Server** Fixed issue.
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: can't hear other side voice when make call or receive ca
Don't use a STUN server. It adds an additional point of failure.
Instead, remove your port forwarding and DMZ, and configure your device as per the official guide, including my post below the official guide: http://forum.fongo.com/viewtopic.php?f=15&t=16206
Instead, remove your port forwarding and DMZ, and configure your device as per the official guide, including my post below the official guide: http://forum.fongo.com/viewtopic.php?f=15&t=16206
-
- One Hit Wonder
- Posts: 1
- Joined: 05/21/2015
I can't hear other side voice when make call or receive call
since 2 weeks ago, my FPL can't hear other side voice, other side can hear my voice. it happen on both outgoing and incoming call, i use it for long time and had no issues before
-
- One Hit Wonder
- Posts: 1
- Joined: 05/30/2015
- SIP Device Name: PAP2T
- ISP Name: Bell
- Computer OS: Win8
One Way Audio on new line
I bought 2 new SIP configurations and both of them have the same issue: one way audio. I cannot hear the other party.
Using same PAP connected to same modem port with same config with an old FPL number it works perfectly.
I think the problem is related to registration of the new number.
FPL just closed ticket that I open for support without even looking at it.
What do you suggest?
Using same PAP connected to same modem port with same config with an old FPL number it works perfectly.
I think the problem is related to registration of the new number.
FPL just closed ticket that I open for support without even looking at it.
What do you suggest?
-
- One Hit Wonder
- Posts: 1
- Joined: 05/25/2015
- SIP Device Name: Grandstream HT701
- Firmware Version: 1.0.6.1
- ISP Name: teksavy
- Computer OS: Windows 8.1
- Router: Linksys something
Re: can't hear other side voice when make call or receive ca
Hi,
I have the exact same problem. I only have one way audio, people can hear me but I can't hear other people.
I have two Grandstream HT701 and two configuration file, both ATA are configured exactly the same way. The problem only happen with one of the config file; the other config file works perfectly. I entered just the phone number and password to both ATA (keeping all the other setting the same) and both ATA works properly however as soon as I enter my second phone number and config file, both ATA have this one way audio problem where I can't hear other people but they can hear me.
Anybody has a suggestion on how to get this issue fixed?
Thank you.
Minh Tang
I have the exact same problem. I only have one way audio, people can hear me but I can't hear other people.
I have two Grandstream HT701 and two configuration file, both ATA are configured exactly the same way. The problem only happen with one of the config file; the other config file works perfectly. I entered just the phone number and password to both ATA (keeping all the other setting the same) and both ATA works properly however as soon as I enter my second phone number and config file, both ATA have this one way audio problem where I can't hear other people but they can hear me.
Anybody has a suggestion on how to get this issue fixed?
Thank you.
Minh Tang
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: can't hear other side voice when make call or receive ca
This is a widespread problem that has been going on for a couple of years now.
Send Fongo Support a PM with the ticket number: http://forum.fongo.com/memberlist.php?m ... ile&u=7852
Please include the following quote in your PM so that they can verify your device is configured correctly:
Send Fongo Support a PM with the ticket number: http://forum.fongo.com/memberlist.php?m ... ile&u=7852
Please include the following quote in your PM so that they can verify your device is configured correctly:
amor_issa wrote:Using same PAP connected to same modem port with same config with an old FPL number it works perfectly.
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: can't hear other side voice when make call or receive ca
Open a ticket: http://support.fongo.com/anonymous_requests/newmtang2918@gmail.com wrote:The problem only happen with one of the config file; the other config file works perfectly. I entered just the phone number and password to both ATA (keeping all the other setting the same) and both ATA works properly however as soon as I enter my second phone number and config file, both ATA have this one way audio problem where I can't hear other people but they can hear me.
Send Fongo Support a PM with the ticket number: http://forum.fongo.com/memberlist.php?m ... ile&u=7852
-
- Just Passing Thru
- Posts: 7
- Joined: 06/01/2015
- SIP Device Name: Grandstream HT701
- ISP Name: Cogeco Cable
- Computer OS: Mac OS 10.10
- Router: Airport Time Capsule
I cannot hear anyone on outgoing calls
Hello,
Brand new to this, but I have gone and configured everything properly according to all the documentation I have seen. I'm using a Grandstream HT701 and the router is an Airport Time Capsule. People can call me no problem and we can hear each other fine. However when I call out I cannot hear any ringing nor do I hear the person on the other end, but they do not have an issue hearing me whatsoever.
I have setup the port forwarding on the router, but still not working. I have reboot the ATA a couple of times with no success.
Any help would be grateful.
Brand new to this, but I have gone and configured everything properly according to all the documentation I have seen. I'm using a Grandstream HT701 and the router is an Airport Time Capsule. People can call me no problem and we can hear each other fine. However when I call out I cannot hear any ringing nor do I hear the person on the other end, but they do not have an issue hearing me whatsoever.
I have setup the port forwarding on the router, but still not working. I have reboot the ATA a couple of times with no success.
Any help would be grateful.
-
- Just Passing Thru
- Posts: 7
- Joined: 06/01/2015
- SIP Device Name: Grandstream HT701
- ISP Name: Cogeco Cable
- Computer OS: Mac OS 10.10
- Router: Airport Time Capsule
I cannot hear anyone on outgoing calls
My issue has been resolved by Fongo Support, so no need for further assistance!
-
- Just Passing Thru
- Posts: 2
- Joined: 06/28/2015
- SIP Device Name: Freephoneline
- ISP Name: Fullmovil
- Computer OS: Windows 7
- Router: 3g router
No audio at all
Test the settings and everything is fine.
When I call there is no audio at all. It says I am connected, but there is nothing, no audio in no audio out.
I have opened the firewall for the program.
I am using windows 7.
What is going on?
When I call there is no audio at all. It says I am connected, but there is nothing, no audio in no audio out.
I have opened the firewall for the program.
I am using windows 7.
What is going on?
-
- Just Passing Thru
- Posts: 2
- Joined: 07/09/2015
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.3.5 (004p_XU001) A
- ISP Name: CIK FTTN
- Router: HG-A800(3 in 1)
freephone online VOIP no out going call
1. incoming call is fine when we just change our internet provider from Rogers to Bell fiber (CIK FNNP PROVIDER)
2. But I can't make a call outbound, I try to call my cellphone ,cellphone is ringing but can't hear from the VOIP phone .Switching from voip2.freephoneline.ca to voip.freephoneline.ca makes no difference.
3.Sometimes it is going fine. when I tried outgoing calls, it took about 1 minute until the other side can receive my call,or can't get through (took 1 minute until I canl hear the ring tone for the otherside as well ). I've tried to reset the phone adapter also the router, but nothing worked. no problems for incoming calls.
4.We followed CISCO-SPA112 Setup guide,nothing changed.
5.voip ADAPTER: Cisco SPA112; network in Toronto:CIK (bell)FTTN; MODERM: CIK TELECOM 's DSL MORDEM: HG-A800 which is multiuse for ROUTER,VOIP ATA
2. But I can't make a call outbound, I try to call my cellphone ,cellphone is ringing but can't hear from the VOIP phone .Switching from voip2.freephoneline.ca to voip.freephoneline.ca makes no difference.
3.Sometimes it is going fine. when I tried outgoing calls, it took about 1 minute until the other side can receive my call,or can't get through (took 1 minute until I canl hear the ring tone for the otherside as well ). I've tried to reset the phone adapter also the router, but nothing worked. no problems for incoming calls.
4.We followed CISCO-SPA112 Setup guide,nothing changed.
5.voip ADAPTER: Cisco SPA112; network in Toronto:CIK (bell)FTTN; MODERM: CIK TELECOM 's DSL MORDEM: HG-A800 which is multiuse for ROUTER,VOIP ATA
- Fongo Support
- Site Moderator
- Posts: 1689
- Joined: 01/01/2013
Re: freephone online VOIP no out going call
Hi,wolaiye wrote:1. incoming call is fine when we just change our internet provider from Rogers to Bell fiber (CIK FNNP PROVIDER)
2. But I can't make a call outbound, I try to call my cellphone ,cellphone is ringing but can't hear from the VOIP phone .Switching from voip2.freephoneline.ca to voip.freephoneline.ca makes no difference.
3.Sometimes it is going fine. when I tried outgoing calls, it took about 1 minute until the other side can receive my call,or can't get through (took 1 minute until I canl hear the ring tone for the otherside as well ). I've tried to reset the phone adapter also the router, but nothing worked. no problems for incoming calls.
4.We followed CISCO-SPA112 Setup guide,nothing changed.
5.voip ADAPTER: Cisco SPA112; network in Toronto:CIK (bell)FTTN; MODERM: CIK TELECOM 's DSL MORDEM: HG-A800 which is multiuse for ROUTER,VOIP ATA
Our servers are not down.
http://status.fongo.com/
The issue might be caused by the sip alg function on your new modem.
https://fccid.io/document.php?id=2050592
I think you should use voip4.freephoneline.ca:6060 on your SPA112 device.
Also- please check your caller ID name (display name)- see below:
http://support.freephoneline.ca/entries ... -supported
regards,
-
- Just Passing Thru
- Posts: 3
- Joined: 07/09/2015
- SIP Device Name: ht 286
- Firmware Version: HT287 Rev4.1
- ISP Name: cable
- Computer OS: win xp
- Router: dpc3825
Re: I can hear people just fine. They Cannot hear ME
What was the fix? I have a similar problem!!
Thx
Thx
Re: I can hear people just fine. They Cannot hear ME
This is an ongoing problem.....however, it's also random but consistent. Make sense?
Re: can't hear other side voice when make call or receive ca
I'm having a similar issue since getting my number ported, outgoing is fine as is incoming. But 1 out of 10 incoming calls cannot be heard, the other side can hear me but i cannot hear them. If they hang up and call a second time everything works as excepted. Any fixes?
Linksys SPA2102, i have triple checked the configuration.
Also set
Handle VIA received: yes
Handle VIA rport: yes
Substitute VIA Addr: yes
Linksys SPA2102, i have triple checked the configuration.
Also set
Handle VIA received: yes
Handle VIA rport: yes
Substitute VIA Addr: yes