pkumar74 wrote:Hi,
I rechecked my configuration, Register Expires was set to 1800, changed to 3600 but still the problem is same. All my settings are per guide mentioned.
Please help/ advise next steps.
Thanks,
Kumar
Hi,
I would suggest to do a factory reset and reconfiguration as per the document we have provided.
Step 1.
Factory reset:
Plug in power adapter
Plug in a phone to ‘Phone 1′ port of the SPA-2102
Dial ****
You should hear ‘Configuration Option Menu’
Dial 73738# (RESET#)
Press 1 to confirm the reset
Step 2 .
Enable web interface:
Dial **** into the phone connected to the ATA device
You should hear ‘Configuration Option Menu’
Dial 7932 then press 1 to enable.
Hang up when you hear option saved.
Step 3:
Obtain the IP address of SPA 2102:
Plug in Ethernet cable to router and wait for several seconds
Dial ****110#
Listen to IP Address which is read back to you
Plug your PC into the LAN (Ethernet) port of the SPA-2102
Enter IP Address into your web browser (For example.
http://192.168.1.10)
You should now see the Linksys SPA-2102 Web Interface
Step 4:
Configure device:
Input the IP address you have obtained in Step 3 in any browser on your PC, and configure the device using the attached document as a reference.
That will resolve the issue.
Best regards,