billcanada wrote:Is anyone else having this problem?
No.
http://status.fongo.com/
I have not changed any of the settings in my VoIP adapter but all of a sudden out of the blue I get, "Register Failed: No Response From Server".
That's an issue on your end.
"1. If you used the OBitalk web portal to configure your ATA, you need to continue using
http://www.obitalk.com for now. Enter the expert menu (advanced configuration; it's an "E" icon). Otherwise, dial ***1, and enter the IP you're told into your web browser.
If you used the Obitalk web portal (
http://www.obitalk.com) to configure your ATA, keep in mind that you must continue using it to configure your ATA. Otherwise whatever settings you change will eventually be overwritten by what you previously entered at obitalk.com anyway. If you wish to disable this behaviour, dial ***1. Enter that IP address into a web browser. Navigate to System Management-->OBiTalk Provisioning-->select Disabled for the method. Save. Reboot ATA. Now obitalk.com won't overwrite whatever changes you make via the device's interface (via IP address).
Pick one method (obitalk.com) or the other (IP address of device) for changing device settings. But do not use both methods. Keep in mind that activating Google Voice requires using the Obitalk.com web portal.
2. Navigate to Voice Services-->SP(service you're using) Service-->X_UserAgentPort
Change this to something random between 30000 and 60000
(save settings/reboot)"
If that works there's a bug in your router causing a corrupted NAT connection.
Regardless, I suggest going through these steps:
http://forums.redflagdeals.com/freephon ... #p26808348
And also double check your registration timers against the values in the .pdf guide found here:
http://forum.fongo.com/viewtopic.php?f=15&t=16196