edwinma02 wrote:I am using a Bell router/modem and having hard time disabling SIP ALG and how to bridge.
maybe there is something wrong with the way I configure it.
trento wrote:My service is not working. No dial tone and no incoming or outgoing calls. I unplug the box for a few minutes and it works. After some time the same symptoms happen. Any ideas?
mh1983 wrote:. Do the retry settings seem off?
Liptonbrisk wrote:mh1983 wrote:. Do the retry settings seem off?
Yes.SIP registration failure retry wait time (the first one) should be 120.
If your ATA makes more than 5 registration attempts within 5 minutes, you'll be temporarily IP banned from the Freephoneline server you were attempting to register with.
mh1983 wrote:
Hopefully that was the bad setting
So the question you should be asking yourself is why is registration failing?
Is your internet connectivity dropping frequently? That's an ISP issue.
Are you constantly turning off your modem and router before going to sleep?
If so, when you wake up, the proper device startup order is modem-->router (wait about 5 minutes)-->ATA.
Also, even if you don't have an OBi200/202, the preamble in the guide over here contains good general info:
http://www.filedropper.com/obihaiobi20x119
mh1983 wrote:
Interesting point. I do have my modem/router/ATA connected to a timer that reboots nightly at around 3 am EST. I don't have it set up such that the modem/router comes back on, and then the ATA 5 minutes afterwards. I'll have to look into setting up this behaviour with two timers.
molsonbubba wrote:Same for me today, Jan 15:
Registration State: Can't connect to login server
Started about 2 hours ago or so. Milton, ON.
Cheers
shaan wrote:it says THAT PASSWORD IS NOT VALID . i can call from my cell phone to home and it works but outgoing call says that password is not valid.
Users browsing this forum: Majestic-12 [Bot] and 6 guests