cisco Spa112 version1.3.5(004) problem, help!!!

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo

cisco Spa112 version1.3.5(004) problem, help!!!

Postby luzhao » 11/09/2019

hi.Guys,
I just bought a brand new Cisco Spa112 Version1.3.5(004) from Canada computer.
I followed all the configuration for spa112 Version1.3.3(015),
and plus changed this:

Handle VIA received: yes
Handle VIA rport: yes
Substitute VIA Addr: yes

but somehow only one way call, Only receive call no outgoing call.
Is there any extra setup for Version1.3.5?
This morning I reset the ATA and reloaded everything but same thing happened , only one way
Please help.
Thank you so much
luzhao
Just Passing Thru
 
Posts: 3
Joined: 11/09/2019
SIP Device Name: cisco
Firmware Version: 1.3.5
ISP Name: carrytel
Computer OS: window7
Router: linksys

Re: cisco Spa112 version1.3.5(004) problem, help!!!

Postby Liptonbrisk » 11/09/2019

1) What brand and model modem are you using?

2) What brand and model router are you using?
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2764
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: cisco Spa112 version1.3.5(004) problem, help!!!

Postby luzhao » 11/09/2019

hi, Lip.
The modem is Cisco model DPC3008,
The router is Linksys model EA6500
I am using carrytel cable which under cogeco

Please let me know if any further info. needed.
Thank you so much!
luzhao
Just Passing Thru
 
Posts: 3
Joined: 11/09/2019
SIP Device Name: cisco
Firmware Version: 1.3.5
ISP Name: carrytel
Computer OS: window7
Router: linksys

Re: cisco Spa112 version1.3.5(004) problem, help!!!

Postby Liptonbrisk » 11/09/2019

Oh, no outgoing call? I misread and thought this was a one-way audio issue. What happens after you dial?

1. Check your dial plan: viewtopic.php?f=15&t=16206#p64088
Use the PDF guide.

2. Are outgoing calls reaching FPL’s server?
Login at https://www.freephoneline.ca/callLogs.
Check your outgoing call logs.

If you mean there’s no outgoing audio instead, that’s a different problem. In that case, click http://forums.redflagdeals.com/anyone-h ... #p26234003 and follow steps 1 through 15 towards the bottom of that post.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2764
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: cisco Spa112 version1.3.5(004) problem, help!!!

Postby luzhao » 11/09/2019

when I try to make a phone call , only dial the first number like 4, the busy line signal kick in.
this afternoon,I just borrowed a Linksys adpater( Model PAP2T,maybe 10 years old ) from my friend who used FLP for long time.
His adapter works fine .
Is there any setting between Linksys router and Cisco spa112 (1.3.5 version),
or some other setting for cisco spa112 (1.3.5 version)
I used spa112(1.3.3) to do the config.
may some different?
thanks
luzhao
Just Passing Thru
 
Posts: 3
Joined: 11/09/2019
SIP Device Name: cisco
Firmware Version: 1.3.5
ISP Name: carrytel
Computer OS: window7
Router: linksys

Re: cisco Spa112 version1.3.5(004) problem, help!!!

Postby Liptonbrisk » 11/09/2019

The problem you're describing is typically due to a dial plan syntax issue in your ATA. Check your dial plan for typos or errors.
Refer to page 5 of the PDF guide: viewtopic.php?f=15&t=16206#p64088.

Login to your ATA. Navigate to Voice-->Line Status-->Last Called Number. If you just see "4", using your example, or incomplete phone numbers, you
should know what the problem is: the problem is your dial plan in the ATA. If the ATA is simply sending "4" out, that's insufficient to complete the call.
There's a problem with the ATA's dial plan.

Router settings are not the problem.


By the way, the engineering team that designed the PAP series left and eventually started designing Obihai ATAs. They are the true successors and not the SPA series.

https://forums.redflagdeals.com/freepho ... #p21479663
Pianoguy wrote:The PAP/SPA family of ATAs were an industry standard for many years until Linksys EOL'd them in 2012. Did you know that not only were Sipura and Obihai ATAs designed by the same engineers, those engineers also invented the ATA at Komodo technology 15+ years ago? OBi ATAs are really the latest versions of the PAP/SPA ATAs - granted, with more/better call routing features, better hardware, and better audio quality - but the hundreds of thousands of people who used PAP/SPA ATAs before Obihai went on the market would likely not call a genuine PAP/SPA garbage (with the possible exception of the SPA3xxx).
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2764
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others


Return to Community Support

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 18 guests

cron