*67 autodial string for cisco SPA8000

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

*67 autodial string for cisco SPA8000

Postby Tranthom » 09/17/2019

Hi

I'm having a spa8000 and I would like to know if there's a way to setup a sting in it, that will auto dial *67 everytime I lift the receiver so I would not have to do it myself each time.

thanks
Tranthom
Just Passing Thru
 
Posts: 8
Joined: 09/27/2011

Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 3 guests