Fongo Community Forums

rajajis

Thanks, No! its not fixed but I don't have enough knowledge to figure this out So I quit.

rajajis

I can see the difference Thanks for quick responce Happy friday!

rajajis

rajajis

Long pause before connecting other line almost 20 seconds silent then you hear the ring anyone have any idea where things gone wrong.
Thanks

rajajis

ma678 wrote:Never had drop call even if my wife talked to her friend for more than 100 minutes.
Can you Please post your Settings so I get mine fixed these bugs.
Excellent service.

Thanks.

rajajis

My line when I dial out long about 20 seconds remains silent and then I hear the ring going on the other end.
What could be the setting I should look into. Thanx in advance.
PS: Pap2t 5.1.6 LS Line 1 FPL Line 2 MJ.

rajajis

First of all Thanks for your input , But I am helpless here I am beginner considering this arp and things all I wonder how i could connect my pap2 to my computer to update firmware as you know this is corrupted and I can succesfully ping the device also arp -a shows the device IP address and mac add...

rajajis

What I further learned from reading posts my unit and most units sold on ebay and hong honk kijiji craiglist are shortlived they often break with small power surge or resets and I couldn't get firmware recovered because the serial number and mac address are cloned not genuine If they were genuine re...

rajajis

Well 73738#1 factory reset's the device - I would leave in unplugged for about 20 seconds then plug it back in. Minus calls going straight to voicemail was the ATA working before the reset?.. Do you think it could have been a power surge or outage? Power supplies/outlets almost never just 'die' the...

rajajis

My Phone incoming calls started going directly to Vm so I decided to reboot by dialing ****73738#1 But sytem did not responded since then ATA power LED started to blink I have no access to web interface its Diagnotic come out as device not accepting connection I tryed all rebooting from ISP modem to...

rajajis

bridonca wrote:Any chance that can change any time soon? I would love to have my ATA and mobile SIP phone ringing at the same time.

VBuzzer has that option upto 3phone Including softfone rings simultenously

rajajis

The Hooked to ATA rings but not the softphone is it norm?

rajajis

I have rogers extreme 9.7MB up down .95 pap2 na calling from 647-428 to 416-546 call dropped after 6min. router TP_LINK wr642g

rajajis

My softfone test connection quotes need 13000 port to open How it is done I am not quite sure I played with some port triggering and virtual .....

Fongo Community Forums

Search found 14 matches

Re: pap2 NA power LED blinking no access to web interface

Re: long 20 sec. delay after call made and hear the rings

Re: long 20 sec. delay after call made and hear the rings

Long pause before connecting other line

Re: dropped calls problem

long 20 sec. delay after call made and hear the rings

Re: pap2 NA power LED blinking no access to web interface

Re: pap2 NA power LED blinking no access to web interface

Re: pap2 NA power LED blinking no access to web interface

pap2 NA power LED blinking no access to web interface

Re: Softphone and HardPhone will it Ring Simultenously

Softphone and HardPhone will it Ring Simultenously

Re: 5 - 90 Min into the call and drops out

port forwarding 13000 how it is done?