Fongo Community Forums

I am with FPL. There is nothing wrong with router, modem and ATA. I can make and receive a call as normal. But I am not at home, somebody call me and leave me a message. I don't get a message. My account shows me that I don't have any message. When I press *98, it says that there is no message. Nor...

I live in Mississauga, ON and I use a VOIP adapter to make and receive calls. For over a week now my lines have not been working. Emails to customer support have not been answered. You would think freephoneline/fongo would at least acknowledge that there is a major problem and post something about ...

gab wrote:I have a SPA112 and ...

Is there something wrong with my ATA setup ?

...

Not necessarily however <cough>Belkin <cough>.

Your 2wire is a modem plus router. If you connect your E4200 router to your 2wire, then you will have double NAT, the first from 2wire and the second from the E4200. Your options are: 1-use the inferior routing and wireless features of 2wire, and no other device with routing function is to be added....

Sorry I can't see how. Could you explain please? It should by getting it from the router because I don't have my ISP user name or password enter into the modem. Really? And yet your modem gives you 192.168.0.1? Hmm! As you can see I do not have DSL nor the modem and router that you have, however, I...

Scoponox wrote:I should mention that my modem (2wire 2701HG-G with QWEST firmware) has IP address: 192.168.0.1....maybe this is where I am wrong?

...

Doesn't your above statement tell you that your 2wire is doing PPPoE?

I should mention that my modem (2wire 2701HG-G with QWEST firmware) has IP address: 192.168.0.1....maybe this is where I am wrong? ... Yes, that is one area where you are wrong. A modem gives you a public IP address, and a router gives you a private IP address such as 192.168.0.1. Essentially, you ...

It's working now. Wow the resolution of the outage is waaaaayyyyyyy better than the recent DNS outage of Rogers in Southern Ontario considering that Rogers is a much bigger multi-billion company.

Hello, Any one having problem connecting out going call in Calgary? Please post. Thank you, JR It is a Fongo service issue...it is probably network-wide. Cross your fingers that somebody is working on it. Fortunately, you should not be missing incoming calls as there is no problem with it. Follow i...

Thanks for this! I tried this in hopes of solving my phone not able to dial touch tones. The provisioning worked but I cannot dial out, it gives me a busy tone, but I'm able to receive calls. Please help! Wrong time to test...Fongo has another service interruption as of this writing. You will have ...

@mgadei I believe it is Bing Kol who is accused of shouting. And he is explaining that he was not shouting. Anyway, your posts are a bit confusing because you mentioned about cable internet, a download speed of 10 mbps and upload of 1.5 mbps, and your profile indicates freephoneline as your ISP. Let...

The Dell relationship is still alive and well. If you'll notice when you log into the app there's still branding in various places and some Dell ads in rotation as well. But, is this not because it takes ages before Fongo (et al) softwares are corrected? Just asking. :o Yesterday, it was announced ...

@jchen I have an unlocked FPL and this is what I tested today. Note that this was just to test the features (hence may not be conclusive) as I use a different setup to handle my incoming calls. In my online account: -Set Rings before voicemail to 5 (max). -Set Follow-me options to: Status: Enable Ri...

Cross-posted. Reply is here. http://forum.fongo.com/viewtopic.php?f=38&t=7054

At this time we can't find any MWI related issues on our end. My test on the Grandstream on my desk yielded a fairly fast MWI response (within about a minute or so, but I wasn't timing). I notice you're both using PAP2T ATAs. Do we have any other forum members reading the board who are using PAP2Ts...

Nimal wrote:I have a Linksys SPA3102 and where should i put the settting in . their are 2 opctions i have " Line 1 or PSTN ".

Put it in Line 1.

You may also want to read this...
http://forum.fongo.com/viewtopic.php?f=15&t=1065

You did not mention enough info for anybody to help you.

So here is my shot in the dark. If you have a Linksys ATA, it could be a dialplan issue. Post your dialplan and we will try to help you.

marginal wrote:Hello and thank you very much.
It worked (I hope it will work for a long time).

Regards.

Sure it will!

Had been working for me since day 1 without a hiccup!

BTW, you are welcome!

cyber062 wrote:Hi
I try to call to Visa Desjardins (514-397-4700) and I doens't have a line.
Any peolples have this problem ?
Or am I alone ?

I am not sure if you are alone, but I just dialled that number and successfully connected to their IVR. No problem here.

... We even tried plugging the ATA right into the modem, same problem. His internet speeds are roughly 28 mbps download and 0.5 mbps upload. We even switched out the modem and the problem is still there. If there was nothing else using internet bandwidth at the time of your tests, then either your ...

Call waiting works perfectly on my FPL lines so I would say that the problem is not on FPL's end.

I suggest that you try dialling *56, wait for dial tone then hang up. Call waiting should work after that. Give it a test...good luck!

I have a few minutes on my hands before my meeting, so here...say ah! Add "911!" at the beginning of your dial plan. Hence your dial plan would look like, (911!|...) replacing the ... with the original dial plan without the parentheses. A better approach would be to redirect the 911 call t...

Continuing on FONGO_mike's reply above...

However, since you have a PAP2T-NA you can block any number from being dialled out from your phone. You have to search the forum or google PAP2T dial plans as I have a short window to do that for you at the moment.

It was more of a point that I was making, back against 'crichdr' ... (s)he was pretty quick to pile on Fongo and blame the whole shot there -- myself, I tend to spread blame around where it belongs, and I hope apportionately. So .. FONGO -- fix your infernal default PC softphones (all brands!)!!!! ...

You're welcome. Am glad to help whenever I can and have the time.