Fongo Community Forums

I can see they'll just pull the plug at some point. Your username on the SIP just won't work and you won't be able to ask about what happened. You're SIP will just become unregistered.
It was good while it lasted, it was a short "lifetime" though.

Here's the fax I keep getting, about 2 a week from the same people. I've been calling them most days to b*tch about them, they say a marketing company is doing it. They take my number to remove but still getting them. I've also called the number to remove myself but it probably made it worse. I've p...

Everyone's telling me different stories on what ports to forward, the list just keeps on growing. Not just this thread/forum but others too, even after I tell them I'm not involved with softphone whatsoever. The timer is at 180 seconds now. My phone's out again an hour earlier than as regularly sche...

I'l try again tonight when it drops at 7pm again but will use the full syslog output options. I'd like to figure what's going on, I do notice my ip address changes when I'm having problems. Is there an option that will update the server with my new ip or something to re-register? the new ip does sho...

Okay, I've forwarded all of those ports like what was last mentioned and tonight at 9pm, just like every other night registration fails and it's been okay for the rest of the day. At 11:00pm it'll be fine again. 2 hours of flakeiness every night. I run a syslog on my ATA and my Linksys router. Do is...

Who is IP 192.168.1.108 and why are you forwarding most port of FreePhoneLine to it? .108 is the laptop where the software version of free phone line is installed if we want to use it, I was told port 6060-1 was just for the software version, 5060-1 were for the ATA if it's actually using that port...

In voice, line 1, NAT settings, Nat mapping enable. Try that to "NO". I had it at no, which was default but some website told me to try that as yes and the # of problems improved since I changed it to Yes. Also, as it's been mentioned by another member, you really ought to verify that the...

No comments on any of these settings? This might help other users as well.

I still have to unplug/plug in my router, modem, ATA every couple days because I notice it won't register, then it works again.

Here are my settings 10-11/11

Here are my settings 7-9/11

Here are my settings 4-6/11

Here are my settings 1-3/11

Because you can make calls, I am almost certain you still have a port forwarding issue. Your DD-WRT router needs to forward at least 2 ports (5060 and 12000) to the SPA2102, and the SPA2102 has to be configured to accept them. From the DD-WRT router, did you forward those 2 ports to the SPA2102 (50...

I was told all say my phone was busy but no one was home :) I can call out fine though and it says registered. HEre's what's in my Linksys router: Application Port From Protocol IP Address Port To SPA2102 5060 UDP 192.168.1.2 5060 SPA2102 5061 UDP 192.168.1.2 5061 In my ATA 2102 My SIP port is 5060....

I have a DSL modem TPLink 8816 with a Linksys SPA-2102 ATA and a Linksys WRT54G/GL using firmaware DD-WRT v24-sp2. I have everything in my network static with my ATA behind my firewall but my ATA is failing a lot when trying to register with FPL, it seems from 7-9pm it fails most. A lot of people ar...

If there is a known outage will there be a post made or automated message left on the support phone line? I've been having issues lately with my Linksys SPA-2102 not being able to register. It's been fine up until now and I didn't make any changes, everything else on my network if okay. This isn't a...

Still, what are all the ports for and specifically what does each port do? I'd like to label them in my router.
This is for both the ATA and the softphone.

I see a lot of different posts and people are mentioning more and more ports. I'm trying to set up my router and would like to label the entries, not just voip1, voip2 etc. What do I need for the softphone? Do I need one port or a whole range? I have been seeing: 53 69, 5060-5061, 6060, 6061, 13000,...

I notice my Linksys SPA-2102 manual says only hook a phone directly to the phone port of the ATA, not wall outlet wiring. In my basement I have a patch panel where one main phone wire goes and spits to direct runs to each wall phone outlet upstairs. I'd like to hook that one wire to my ATA and then ...

I called tech support and they suggested I take the slash character out of my caller ID name and now eveything works. WEIRD, I spent 2 days on this. I put the slash or underscore back in and it stopped working so that's the issue.

My caller ID comes up as unknown name though, not sure why.

Yes, and it gives me a time of how long I've been connected for.

I got the config details but I can't make or receive calls. When I dial I get a dial tone but when I key in a number it just sits there waiting for more. I have a Linksys WRT54GL flash with the latest DD-WRT firmware and the soft phone works fine. I got the config to use with my Linksys SPA2102 and ...

I updated to dd-wrt.v24_micro_generic.bin first to minimize space in the router's memory and then flashed to dd-wrt.v24_std_generic.bin and it works now, weird. All of my settings appear to be the same as the stock firmware version. Neat-O thanks for the tip, I would still be playing with setting fo...

Really? What's happening that's causing the problem?

I just downloaded the software to test for free before signing up for the $50 config file, I already bought the Linksys SPA2102 phone switch/router but I havne't hooked it up yet. I tried to run the software on the laptop and I'm getting 'no connection to the server'. It comes up with suggested ip's...