Fongo Community Forums

I have a line with vbuzzer a voip service too. So I wish to port that vbuzzer no to freephoneline, because I have two lines with freephoneline and one no is starting with 437 and the vbuzzer is starting with 416. Can I port and what are the costs?

For me i needed to use a new email that was never used with fongo or freephoneline and all got ok.

Yes i can certify that once in a while i got the same message, no matter on wifi or data plan, then after a while all come back ok, more over app keep changing the ringtone mainly when i choose to use contacts ringtones.

Today evening Fongo support did a great job and remotely they made the proper settings to my second freephoneline with grandstream ht502. Thanks once again. All is working as it should!

Today evening Fongo support did a great job and remotely they made the proper settings to my second freephonline with grandstream ht502. Thanks once again. All is working as it should!

Today evening Fongo support did a great job and remotely they made the proper settings to my second freephonline with grandstream ht502. Thanks once again. All is working as it should,

I am using my tablet now. Yes indeed yesterday they replied. I had a emails exchanges, and I still have to do Smth so that Cs could check what is wrong with my service. Sorry for being a bit harsh. My grandstream is working now with that settings you posted. I already posted for others on other thre...

I used this settings for my grandstream ht502 and now is working from 20 hours. http://support.freephoneline.ca/entries/23120323-VoIP-Unlock-Key-Credentials Hope it helps. The only issue I cannot listen to my voicemails - when I try to listen no 1 or 2 or * no combination to work to listen just to h...

I played for a while with both. The problem is that the grandstream was bought from vbuzzer and never worked well, when i applied for first line with freephoneline i set both line one line for vbuzzer and one line for freephoneline, but frequently got problems. So I decided to buy a linksys pap2 and...

Hi, Recently or a while ago I bought from freephoneline.ca the voip unlock key for my no 647547XXXX. I tried to use at my daughter place but no luck, with 2 different ata;i checked at my place where i already have an ata with another freephoneline that is working fine, still no luck. So I drew to co...

Thank you, For your quick advice but my grandstream is configurated - FXS PORT 1 to vbuzzer with: local sip port 5060 and local rtp port 5004, that was configurated by vbuzzer voip provider when they sent methe ata, and FXS PORT 2 was configurated for by me for frephoneline with configuration given ...

Hey, Funkytown, A while ago I applied for a second phone no. from freephoneline. For the first one I paid $ 50, so it was working through ata Grandstream 502 device like a regular home phone. All was ok; but today after I applied for second no. and if the login in the software is set to the second n...

Forget it,

The provider sent an email and said to reboot, and all is now ok, no blinking after reboot.

So only reboot will not working?
I am not sure if after reboot I won't mess with my settings from vbuzzer, because i have two lines, on my grandstream ht502,one for freephoneline and one for vbuzzer!

Have anyone encounter the issue of permanent flashing of light that indicates that you have voicemail, the light is flashing on both -ata and my Panasonic phone too.

Ole! ole! everything got ok. Just few minutes ago I tried what I tried many times before just typed the ip address given by router and voala! login page for ata (I enabled through phone the WAN access a while ago).No need to connect to lan port any desktop pc, I can login even wirelessly from my lap...

Laurent; Thank you for your response.Most importantly now is that I got both lines working properly; It seems that my problem was misunderstood.Should you check here for what i said regarding ata ip address with that ipconfig/renew and got 192.168.97.1 it is vbuzzer settings for this ata -http://for...

Yes indeed but is their loss,because there are not many like us who wish to share their experience on the site - there is a saying "is very easy to do harm but is hard to do good for people". I cannot blame their decision but if they would like to be more helpful with customers having thei...

Right now I got a message from technical support and it seems that morning issue was from them. This is their message: "We did have a minor technical difficulty this morning, if you were to call and receive the 'no funds' error. These issues are all fixed now, and everything is working as norma...

Is 5 pm and the lines are working. My home network is Rogers modem then Belkin router then pc's and ata. That means that from Rogers modem it goes in 4 wired port and wireless Belkin router then from that it goes to pc" and ata; it has never worked if from modem it goes in ata and from ata to r...

Funkytown, Now is ok in another hour is not ok, in the morning I had a 2-3 sec a power cut and then only vbuzzer worked then, when I came for lunch both were working fine, then when I came back a while ago both line were not working then, after restart the ata both line are working again. So smth is...

my question is it is now free for how long because i have been told in the pass my banking card is free (25 year ago) since then is no more free are you gone make the same when every buddy will pass for your service It is free after you pay $50 and after you get the ata and so on.And only after you...

I got some time and I studied the manual; could someone explain what means "Open a web browser, type in the WAN side IP address – for example: http://HT502-WAN-IP-Address". Can I do this with "wan enable" I mean that function sequence-*** 12 WAN Port Web Access Press “9” to toggl...

Ooh,mea culpa, i didnt see it, but Funkytown already got it, I will check tomorrow.

I suggest you refer to your ATA's user manual, it's all detailed how to go in the voice menus and set new configuration for IP settings. I will look for the manual, if I will be able to find it maybe I google it if I cannot find it; I will post next days my experience with this issue.Thanks, anyway...