Fongo Community Forums

does anyone have the spa2102 firmware 5.2.13 .I can't find it any longer on the net. thanks

I have been charged for free calls 416-310-2355.. how do I get this corrected and credited to my account ? thanks for the help.

when calling 416-310-2355 I get charge long distance rates? How do I get a refunded? why is this long distance? thanks for any help.

I have been using this firmware for years.very good.

http://tomato.groov.pl/?page_id=81

does anyone know if this ip phone Cisco 7925G is compatible with freephoneline? Protocol support • Skinny Client Control Protocol (SCCP) • Cisco Unified Communications Manager Versions 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 and later • Cisco Unified Communications Manager Express Version 4.3 and later • ...

thank you for the info.

sadly they didn't include that info.

the people at freephoneline have fixed this strange problem.

I have a strange problem.I can make long distance calls to area code 561 without issues.However when I call a friends number same area code I get an immediate busy signal and the ata says -call state "invalid".they have no problem calling me and I have no problem calling other 561 numbers....

thank you to the Fongo staff for the quick response and answer. You quite simply had to remove the static i.p. address in your router then put in the voip.freephoneline.ca sip server address and reboot both and you were good to go. After doing this I replaced the static address in the router and it ...

Like a few others here I have tried to change my sip server from 208.65.240.142 to either voip.freephoneline.ca or voip2.freephoneline.ca.When I do this I can't register.Any thoughts.thanks

SPA112,latest firmware 1.3.1 (003)

I watch the forums on a regular basis and have to thank you for the help and information you give ...ger482

it is quite strange that after running this setup for more than two years I hit a glitch....go figure.guess will move it behind the router for now and try again later....thank-you all for the input regards Ger482

its DMZed at the modem not at the router.It does connect sometimes , but never had problems for two years before.Was wondering if other Whistle users are having issues.

no stun .this is a new problem.I'm running in DMZ so ports aren't the problem,very strange that it is so random.FPL is just fine ,it seems to be Whislephone has made a change?

for about a week now I get ( Can't connect to login server)on my whistle account.Wondered if anyone else is having this issue.If i reboot the pap2 it connects but will eventually drop out. Any ideas? thanks

thank-you

how long will this announcement be running regarding the deletion of voicemail after a period of time.it is very long and time consuming if you check your mail several times a day.

we bought 2 they were all v3.

for anyone looking for a deal on a good router that runs Tomato software Canada Computers has a sale on Linksys WRT 160n for $19.99 today and tomorrow only.

your 911 number is part of the dial plan ..e.g.
Dial Plan: (911S0|[2-9]xxxxxxxxxS0|1xxxxxxxxxxS0|011xxxxxxxxxxxx.|98*S0|[6-7]x*xxxxxxxxxxx.)

thanks Jake

would you be able to write a short tutorial on setting up a google voice to pbxes to pap2? I have googled this but didn't find any info.any help is appreciated. thanks

thank-you for the reply. will look it up.