Fongo Community Forums

How do you call your office number?

Or you can go to the ADVANCE / USER tab and change MESSAGE WAITING to NO.

My outgoing calls still drop after 30-40 seconds, useless. Duration shows as ZERO! 14166610123 0:00 09.10.10 19:08:47 09.10.10 19:09:19 Onnet Canada $ 0.0 14166610123 0:00 09.10.10 09:25:29 09.10.10 09:26:01 Onnet Canada $ 0.0 14166610123 0:00 08.10.10 16:58:38 08.10.10 16:59:10 Onnet Canada $ 0.0 1...

All of my outgoing calls drop after 40 seconds.
Incoming seems to be ok.

They cannot. FPL will reject the call. It's been discussed before. Use the search.

Bucharest is a very expensive place to terminate to and 10C/min is correct. Most other carriers range from 7C-49C/min to this region. I have put in a tip to see if we can find reliable carrier that would be a couple cents lower, but we also don't want to sacrifice reliability for cost. It's easier ...

What is your RTP packet size set to?

Those numbers work. I've just tried it.

I'm using Kaspersky Anti-Virus 2011.
Version 11.0.1.400(a.b.)
Thanks.

I don't usually use FPL softphone but today I tried to log in and got this warning. 9/22/2010 12:08:34 AM FreePhoneLine 2.2.3 © freephoneline.ca, Inc, 2007 Proactive Defense Detected: PDM.RootShell C:\PROGRAM FILES\FREEPHONELINE\FREEPHONELINE.EXE 9/22/2010 12:08:26 AM FreePhoneLine 2.2.3 © freephone...

Of those Grandstream devices, you mention that it works out of the box, but is that using UPnP? Because if you have UPnP turned off (for better security) then I'm wondering how the grandstream works without port forwarding. I have UPnP turned off in my router. I have a PAP2, SPA 941 & a Globara...

In goes into 'custom dial patterns".

Actually do this:
In 'custom dial patterns" of your outbound route add:

1XXXXXXXXXX
XXXXXXXXXX
98
911

And in the 'Dial Rules' of your trunk add this:

1XXXXXXXXXX
XXXXXXXXXX
911
*+98

Then you would dial 98 for FPL VM.
Let me know if it works.

Softphone does not use 5060/5061.

Then do this trick:
In your outbound route add:
98|*98
Also make sure your FPL trunk has:
*98
in it.

Then dial 98*98 to get to your FPL VM.

Your problem is most likely that new DNS settings didn't propagate in your ATA properly. Do what OverDrive said and let us know.

If it still does not work, pick up the phone and dial ****. Do you get into the configuration menu?

OK> there you go. In:
General Settings > Extension prefix for dialing direct to voicemail > [*]

Can you change that prefix to something else, like [**] or [*9]?

Then make sure you have *98 in your dial plan for your FPL trunk and the outbound route.

ATA cannot do PPoE, so you are ALWAYS using the router. Either Belkin or the one built in the modem. I had the same problem with another provider. Tried Pbxes, my home asterisk server and an ATA. No incoming anywhere, outgoing worked fine. So I gave up on it and left it registered on the ATA for out...

You need to disable *98 feature in Pbxes. Look for it in feature settings.

FPL voicemail cannot be disabled laurent.

Why not set your modem to dial in, then try using belkin as a switch (disable DHCP).

Funkytown wrote:G.711 (PCMU) will give Excellent voice quality and faxing will always work. Great Job (Admin)

True, unless you are on cable with 256Kb upload. Having G729 support then comes in handy.

I think they did it on purpose to discourage people using asterisk and abusing the service. And rest of us using it for residential purposes got shafted in the middle.

Funkytown wrote:G711(PCMU) is working fine on my end in and out, Im using the grandstream ht 286.

And what does it have to do with my topic, seriously?

Why are you forwarding 6060/6061 to your PAP2? Those ports are used by the softphone not the ATA (though they work).

Can you friend get incoming calls?

stangri wrote:I'm using asterisk and I believe it's set to use g279a on the outgoing call and dial tones do not seem to go thru. If I PM you my sip-login can you look into logs or help me troubleshoot this or it's not something you normally do?

Change the codec to G711 and DTMF mode to INBAND.

Indeed, the voice problem has always been an issue. It is actually skipping of dialogue for fraction of a second every now and then. This can be heard at both ends of the phone. Otherwise the voice quality and clarity is fantastic. I tried disabling the QoS but again no avail. Would it be possible ...