How to reset the voice mail indicator?
-
- Just Passing Thru
- Posts: 18
- Joined: 07/02/2009
- SIP Device Name: Linksys PAP2T
- Firmware Version: 5.1.6
How to reset the voice mail indicator?
I currently have no voicemail in the system, yet my light keeps flashing on my phone indication that I have voicemail. I reset router, PAP-2T, etc .. and still flashes.
If I set User 1 - Supplementary Service Settings -Message Waiting to no the light goes out. As soon I switch back to yes, it comes back on.
If I leave it off - when I get a voicemail the phone doesn't flash.
Any ideas?
If I set User 1 - Supplementary Service Settings -Message Waiting to no the light goes out. As soon I switch back to yes, it comes back on.
If I leave it off - when I get a voicemail the phone doesn't flash.
Any ideas?
-
- Just Passing Thru
- Posts: 11
- Joined: 08/07/2010
- SIP Device Name: PAP2T
- Firmware Version: 5.1.6
- ISP Name: Teksavvy 5/1 DSL
- Computer OS: Win 7 x64, WHS Vail, XBMC
- Router: WRT54GL MLPPP, WRT54GS v.5
- Location: Belleville, ON
Re: How to reset the voice mail indicator?
+1 I'm having the same issue.
Had a VM yesterday, cleared it, for some reason my PAP2t still thinks there's a message waiting.
I got tired of lights flashing on my phone so I turned off MWI & VMWI on the ATA.
Had a VM yesterday, cleared it, for some reason my PAP2t still thinks there's a message waiting.
I got tired of lights flashing on my phone so I turned off MWI & VMWI on the ATA.
-
- Just Passing Thru
- Posts: 18
- Joined: 07/02/2009
- SIP Device Name: Linksys PAP2T
- Firmware Version: 5.1.6
Re: How to reset the voice mail indicator?
MIne has since cleared - though I didn't do anything to clear it.
-
- Just Passing Thru
- Posts: 11
- Joined: 08/07/2010
- SIP Device Name: PAP2T
- Firmware Version: 5.1.6
- ISP Name: Teksavvy 5/1 DSL
- Computer OS: Win 7 x64, WHS Vail, XBMC
- Router: WRT54GL MLPPP, WRT54GS v.5
- Location: Belleville, ON
Re: How to reset the voice mail indicator?
+1, just checked my ATA and the msg waiting flag has finally cleared.
Cheers!
Cheers!
-
- Just Passing Thru
- Posts: 11
- Joined: 08/07/2010
- SIP Device Name: PAP2T
- Firmware Version: 5.1.6
- ISP Name: Teksavvy 5/1 DSL
- Computer OS: Win 7 x64, WHS Vail, XBMC
- Router: WRT54GL MLPPP, WRT54GS v.5
- Location: Belleville, ON
Re: How to reset the voice mail indicator?
this issue crept back up on me.
I ended up just going into user1 on my pap and setting message waiting to no.
I ended up just going into user1 on my pap and setting message waiting to no.
Re: How to reset the voice mail indicator?
I have experienced the same issue for the past few months too. The message waiting indicator remains on even though I have deleted all the voicemail messages (confirmed in the online portal).
-
- *Go-To Guy*
- Posts: 532
- Joined: 08/06/2010
- SIP Device Name: Grandstream HT-502
- Firmware Version: 1.0.1.63
- ISP Name: DSL TekSavvy
- Computer OS: OSX Snow Leopard
- Router: Linksys WRT54GL w/tomato
Re: How to reset the voice mail indicator?
Uh oh. Me as well. MWI won't turn off and I've listened to all my messages like two days ago!