Motorola SIP Phones Requiring MAC Address for Cable Internet

Share your tips, tricks and best practise ideas for Fongo services in here!

Motorola SIP Phones Requiring MAC Address for Cable Internet

Postby FONGO_kris » 06/19/2009

Dear all FPL Customers,

All Motorola or other SIP Phones requiring a MAC address for Cable Internet (ie. Rogers) cannot be configured via MAC address.

-- This means feeding your ATA/SIP Phone the SIP Settings/Config File directly, similar to how the the softphone works --

The only way we could configure those (or you could using our config file) is if you had ADSL internet (ie. Bell, 295.ca, Primus, etc).

As for UNLOCKED ATA's that were once with another VoIP company and were unlocked by you or someone else or that you bought unlocked I will put a strong disclaimer that although we will try to support it and will not put any restrictions that are not on our customers that purchase our ATA's, UNLOCKED ATA'S MAY NOT HAVE THE FULL FUNCTIONALITY THAT AN ATA PURCHASED BY US OR ANY RETAIL STORE WOULD AHVE

Unlocking an ATA or any device for that matter may cause it to lose some funtionality even if it is done successfully.

Thanks!
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
User avatar
FONGO_kris
Site Moderator
 
Posts: 1937
Joined: 05/06/2009
Location: Cambridge, Ontario, Canada
SIP Device Name: Polycom 550 IP Phone
Firmware Version: 4.2.0.0310
ISP Name: Rogers Cable
Computer OS: Ubuntu 11.10
Router: Cisco E1200-N
Smartphone Model: Samsung Galaxy S2
Android Version: 4.0.3

Return to Tips & Tricks From Seasoned Users

Who is online

Users browsing this forum: No registered users and 7 guests