Linksys RTP300
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.
1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.
Please stay on topic
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.
1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.
Please stay on topic
-
FONGO_steve
- Site Moderator
- Posts: 2131
- Joined: 07/16/2009
- SIP Device Name: Grandstream 286 & 701
- ISP Name: Worldline.ca
- Computer OS: Windows 7 Ultimate / Mac OS X
- Router: TR1043ND w/ DD-WRT Mega
- Smartphone Model: Galaxy S3
- Android Version: 4.0.4
- Location: Cambridge
Linksys RTP300
Enjoy
You do not have the required permissions to view the files attached to this post.
Steve
Fongo
Development Support Specialist.
Fongo
Development Support Specialist.
-
0xel
- Just Passing Thru
- Posts: 2
- Joined: 04/05/2010
- SIP Device Name: fring
- Firmware Version: 1
- ISP Name: shaw
- Computer OS: Windows 7
Re: Linksys RTP300
Could you please clarify the dialplan setting? there are a bunch of x's there.. what do they mean?
-
FONGO_steve
- Site Moderator
- Posts: 2131
- Joined: 07/16/2009
- SIP Device Name: Grandstream 286 & 701
- ISP Name: Worldline.ca
- Computer OS: Windows 7 Ultimate / Mac OS X
- Router: TR1043ND w/ DD-WRT Mega
- Smartphone Model: Galaxy S3
- Android Version: 4.0.4
- Location: Cambridge
Re: Linksys RTP300
They simply allot for X number of digits to be entered when dialing0xel wrote:Could you please clarify the dialplan setting? there are a bunch of x's there.. what do they mean?
Steve
Fongo
Development Support Specialist.
Fongo
Development Support Specialist.
-
janexmding
- One Hit Wonder
- Posts: 1
- Joined: 10/06/2011
- SIP Device Name: RTP300
- ISP Name: Acanac DSL
- Router: Speedtouch 716v5
Re: Linksys RTP300 Firmware Version 3.2.24
I could not configurate my RTP300. It has the different interface from RTP300.zip (version 3.2.20). There is a dial tone. However, when I dial, it is always busy signal. When I call from my cell to freephoneline, it is said not available. Could you please help me to fix that? Thanks.
-
frankv
- Just Passing Thru
- Posts: 5
- Joined: 11/17/2013
- SIP Device Name: PAP-2TNA
- Firmware Version: 5.1.6(LS)
- ISP Name: Acanac
- Computer OS: Windows 7
- Router: Motorola
Re: Linksys RTP300
I just wanted to confirm the preferred Codec is G729a, I've seen a different Codec configuration for other devices, so I am just trying to confirm which is the correct one.
-
Fongo Support
- Site Moderator
- Posts: 1689
- Joined: 01/01/2013
Re: Linksys RTP300
Hi there,frankv wrote:I just wanted to confirm the preferred Codec is G729a, I've seen a different Codec configuration for other devices, so I am just trying to confirm which is the correct one.
Please make sure you follow the document. Not sure why you saw that G729 is preferred codec. Document says otherwise.
Please check it.
Thanks,
-
jenom
- Active Poster
- Posts: 98
- Joined: 01/03/2012
- SIP Device Name: VDV21
- ISP Name: Acanac VDSL
- Computer OS: Windows 7 Ultimate
- Router: Linksys-EA6900-XWRT-VORTEX
- Location: Mississauga, Ontario, Canada
Re: Linksys RTP300
"why you saw "......he saw it because he has two eyes, he looked and it is there !
yes, frankv saw it correctly , on LINE 1 config page, it shows preffered codec :G729a......which is a wrong setting ....shoul be G711U for the best voice quality
enjoy your device frankv, I love those beatiful bright blue lights!
yes, frankv saw it correctly , on LINE 1 config page, it shows preffered codec :G729a......which is a wrong setting ....shoul be G711U for the best voice quality
enjoy your device frankv, I love those beatiful bright blue lights!
-
Fongo Support
- Site Moderator
- Posts: 1689
- Joined: 01/01/2013
Re: Linksys RTP300
Hi there,jenom wrote:"why you saw "......he saw it because he has two eyes, he looked and it is there !
yes, frankv saw it correctly , on LINE 1 config page, it shows preffered codec :G729a......which is a wrong setting ....shoul be G711U for the best voice quality
enjoy your device frankv, I love those beatiful bright blue lights!
You are right. I was comparing it against this:
http://forum.fongo.com/viewtopic.php?f=15&t=8850
Please try to use G711 as default and not as per the document.
Sorry for all the inconvenience, I apologize.
Thanks,
-
armia741
- One Hit Wonder
- Posts: 1
- Joined: 01/02/2014
Re: Linksys RTP300
Not sure why you saw that G729 is preferred codec. Document says otherwise.