Grandstream HT802 configuration

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

Grandstream HT802 configuration

Postby TankCla » 09/28/2021

I have attached the HT802 config for future users
Attachments
HT802 Grandstream Device Configuration.pdf
(732.35 KiB) Downloaded 87 times
User avatar
TankCla
Just Passing Thru
 
Posts: 9
Joined: 08/13/2015
SIP Device Name: Grandstream HT802
Firmware Version: 1.0.23.5
ISP Name: Cogeco
Router: Arris

Re: Grandstream HT802 configuration

Postby Liptonbrisk » 09/28/2021

TankCla wrote:I have attached the HT802 config for future users


1. Please indicate where to enter SIP Username and SIP Password. Thanks.

2. Transfer on Conference Hang-up

Has anyone tested to see whether setting "Transfer on Conference Hang-up" to "Yes", actually works properly with Freephoneline?
I don't have a Grandstream ATA to test.

That is, when set to Yes, during a 3-way call, when the FPL Grandstream user hangs up, the call is supposed to continue between the other two parties.

The default setting is no, which means the call just gets completely dropped when the FPL user hangs up.

If that setting doesn't work with FPL (that is, if the call doesn't continue between the the two other parties when FPL caller hangs up), it should just remain at the default, "No",

http://www.grandstream.com/hubfs/Produc ... _guide.pdf

Transfer on Conference Hang-up

"If set to "Yes", when the phone hangs up as the conference initiator, the
conference call will be transferred to the other parties so that other parties
will remain in the conference call. Default setting is No"




3. Allow Incoming SIP Messages from SIP Proxy Only

Enabling that should help block SIP scanners/hackers. However, it might prevent Fongo Mobile callers from being able to ring you if you're registered on voip2.freephoneline.ca or voip4.freephoneline.ca:6060
Can someone please test calling from Fongo Mobile to FPL while registered on voip2.freephoneline.ca for me, please, with "Check SIP User ID for Incoming INVITE" set to "yes"?

If that doesn't work, the setting should probably be left at no--and not "yes".

4. Set Check SIP User ID for Incoming INVITE to Yes

This should help block SIP Scanners and hackers.

5. Outgoing Call without Registration

You can leave that set to "no" if you'd like. At least you'll know if you're not registered more easily.
That is, when your ATA is not registered with FPL, outbound calls won't work.

However, strictly speaking, device registration with FPL is not required for outbound calls. It is required for inbound calls only.

I don't have time to go through every single setting, but those are the ones that jumped out at me. A quick, cursory glace suggests the rest of them are fine.

Thank you
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 1915
Joined: 04/26/2010
SIP Device Name: OBi202
Firmware Version: 3.2.2 (Build:8680EX)
ISP Name: Cable
Computer OS: Windows 10 x64 Pro
Router: Asuswrt-Merlin

Re: Grandstream HT802 configuration

Postby TankCla » 09/28/2021

I have made the last recommended changes and I also made notes on the pdf where SIP user & pass should go.

Thank you for your help
Attachments
HT802 Grandstream Device Configuration_v2.pdf
(770.49 KiB) Downloaded 83 times
User avatar
TankCla
Just Passing Thru
 
Posts: 9
Joined: 08/13/2015
SIP Device Name: Grandstream HT802
Firmware Version: 1.0.23.5
ISP Name: Cogeco
Router: Arris

Re: Grandstream HT802 configuration

Postby Liptonbrisk » 09/28/2021

TankCla wrote:I have made the last recommended changes and I also made notes on the pdf where SIP user & pass should go.

Thank you for your help



Thank you, but I am hoping for someone to answer the questions I asked as well because I genuinely do not know the answers to them.
I'm uncertain what the settings should be for #2 and #3 in my previous response.

I would change Check SIP User ID for Incoming INVITE to Yes for the reason I mentioned previously.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 1915
Joined: 04/26/2010
SIP Device Name: OBi202
Firmware Version: 3.2.2 (Build:8680EX)
ISP Name: Cable
Computer OS: Windows 10 x64 Pro
Router: Asuswrt-Merlin


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 4 guests

cron